Evacuation Analysis of 1200 GT Passenger Ship in Case of Fire using Agent-Based Modeling Approach
Journal Title: International Journal of Marine Engineering Innovation and Research - Year 2016, Vol 1, Issue 1
Abstract
This study discusses about safety on board especially during fire condition. During fire, all passengers and crew had to beevacuated into safe place. The study observe at 1200 GT passenger ships, a typical ship which have small dimension vessel characteristic but able to carry passenger more than four hundred persons and also could containt cargo. When the ship was on fire at any circumstances that requires passengers need to be evacuated, it’s obvious that there will be a buildup of passengers when passing through stairs and corridors. The calculation use to estimate evacuation time required based on the IMO guidelines. Studies continued by creating evacuation simulation using Agent-Based Modeling, a simulation modeling that assume human being as an agent that has characteristics resemble to real state of motion. The comparation between the two methods, calculation and simulation are both using two scenarios, day and night conditions. Result show that the simulation generates evacuation time shorter than the calculation method. In the numerical calculation takes 689 seconds and 1595 seconds in day and night conditions, while in the simulation process takes 548 seconds and 1374 seconds in day and night conditions sequentially. This studies also followed by fire modeling study that aims to determine the spread of heat and smoke produced from fire. On the condition of fire, smokewords. production will interfere passengers in the evacuation process. The evacuation time becomes longer and estimates the potential victims affected by fire.
Authors and Affiliations
Muhammad Badrus Zaman, Dwi Priyanta, Ilham Afrianza
Keywords
Related Articles
- EP ID EP219624
- DOI 10.12962/j25481479.v1i1.1384
- Views 344
- Downloads 0
Technical Analysis Ballast Water Treatment By Using Economizer Utilizing Main Engines Exhaust Heat To Comply With International Ship Ballast Water Management At Mv. Leader Win
Based on the International Ballast Water Management regulations (IBWM), waste water ballast itself has the attention of some researchers to reduce the amount of waste species present in the ballast water with a variety o...
Slurry Ice as a Cooling System on 30 GT Fishing Vessel
Indonesia is the largest archipelago country in the world that has a sea area that is very spacious. Indonesian sea area is 5.8 million square kilometers and a coastline of 95 181 km has huge potential in the fisheries s...
Modelling the Turbocharger Cut Off Application Due to Slow Steaming Operation 12RTA96C-B Engine
Out of the total operational costs of a ship, fuel costs account for by far the highest proportion. In view of the global economic situation and the rising oil prices, shipowners and charterers are looking for solutions...
Booster Pump Performance Analysis Towards Rotation Of Impeller For CSD Dredger Type
Dredger are a vessel for lift materials from sub surface to another place above the water surface. Dredger divided into some types such Suction Dredger, Bucket Dredger, Backhoe Dredger, and Water Injection Dredger. Cutte...
Efficiency Analysis of Additions of Ice Flake in Cargo Hold Cooling System of Fishing Vessel
As a maritime nation, the majority of people's livelihood in Indonesia coast is as a fishermen. The process of preserving fish after being caught will determine how good the product quality. One of process on preserving...