Study Of Calculation Of Degaussing System For Reducing Magnetic Field From Submersible Vehicle
Journal Title: International Journal of Marine Engineering Innovation and Research - Year 2017, Vol 1, Issue 2
Abstract
The rapid development of maritime technology in the world to make Indonesia are also increasingly taking the development of maritime technology, such as in a Submersible Vehicle one is degaussing system, this technology should be owned by the vessel so that the vessel can avoid dangerous explosive equipment contained in the sea. Degaussing system is a system that is in use on the metal parts or electronic devices that are at risk of a magnetic field. This system is used to prevent the vessel from dangerous equipment in the sea which can trigger an explosion and the damage that utilize magnetic fields as a metal-detection sensor when the boat was doing dives. To the authors will plan the design degaussing system, and calculating the system in order to reduce the magnetic properties of the Submersible Vehicle which were obtained by the use of Coil Degaussing along 214,5 meters, a diameter of 0,2, with 500.000 coil that will generate a current of 0,0157 Ampere's 0.0787 Tesla generates a magnetic field.
Authors and Affiliations
Sardono Sarwito, Juniarko Prananda, Eddy Setyo Koenhardono, Anggela Wahyu Kurniawan
Keywords
Related Articles
- EP ID EP220073
- DOI 10.12962/j25481479.v1i2.1979
- Views 337
- Downloads 0
Simulation of Double Walled Pipe Impact to Crude Oil Flow in Subsea Pipeline System
Crude oil contains mixed of hydrocarbons, the most commonly found molecules are alkanes (paraffins), cycloalkanes (naphthenes), aromatic hydrocarbons, or more complicated chemicals. In the process of taking crude oil in...
Heat Transfer Analysis of Thermal Oil Plant on Fuel Oil Tanks of 17500 LTDW Product Oil Tanker
The thermal oil system is one type of heater that widely used on ships. The system is an important system used to heat fuel that will be used for the operation of the main engine, auxiliary engine, and boiler. This syste...
Design and Simulation of Automatic Ballast System on Catamaran Ship Based on Programmable Logic Control
Characteristics of catamaran ship which has deficiency to ship stability during maneuvering. to that end, this paper concerns about ballast system design in support of the safety and comfort of passengers on the catamara...
Configuration Selection Based On Lifecycle Cost Of Subsea Production System: Case Of Indonesia Deepwater Field
Subsea tie back systems are important parts of oil and gas production project. The decision to select a subsea tie-back configuration with the objective goal of lowest lifecycle cost can be configured in multiple ways ba...
Maintenance Task Allocation And Planning In KT. X Tugboat Using Reliability Centered Maintenance Method
Reliability Centered Maintenance (RCM) as one of the processes that used to decisive action which should be performed to ensure any physical components or a system can work optimally in accordance with the function desir...