Performance Assessment of the Drying Section of Machines for the Production of Tissue Paper Grades
Journal Title: Lesnoy Zhurnal (Russian Forestry Journal) - Year 2020, Vol 10, Issue 2
Abstract
The paper presents the method for assessment the performance of high-speed Yankee hoods in the production of tissue paper grades and the results of its use in working machine. The following parameters are found applying this method: paper web dryness, air pressure in the wet and dry ends of high-speed convective dryers and temperature of the air spilled out of the hoods. The methodology is based on the measurement of these characteristics during the operation of working equipment with further adjustment of the separate system units. Thermal imaging was carried out during the experiment. It has been found that blowing hot air on the front side of the hood and sucking in the cold air on the drive side leads to uneven moisture profile (measured on the paper machine roll) across the paper web width, a decrease in energy efficiency and the machine capacity. Performance indicator may be, for instance, the spilled air temperature, which on the studied machine is significantly different from the standard value and is 175 °C. The rationality of regular monitoring of air characteristics when changing processing modes is proved. The relevance of the cascade system is substantiated, where not only a direct cascade from the dry end to the wet end is possible, but also there is an opportunity to adjust the humidity of exhaust air by addition/reduction of part of it to/from the dry end. The direct effect of adjusting the humidity of exhaust air in the drying section on reduction of energy costs, as well as the effect of makeup air on the amount of infiltration and the air balance of the system are confirmed. A set of measures implemented within the framework of this methodology makes it possible to achieve energy saving in existing industries. The prospective saving potential of gas is 62 m3/h or 17 % of the current consumption and actual electricity consumption is 6.8 kWh or 4 % for the studied machine.
Authors and Affiliations
D. A. Prokhorov, A. S. Smolin
Morphometric Criteria for Assessing the Containerized Conifers Seedlings Quality
The quality of planted forest crops depends significantly on the qualities of the planting stock. Numerous studies have been carried out to find clear seedling quality criteria and work out methods for their quantitative...
Climate Change and Its Impact on Adaptation and Intraspecific Variability of Conifer Species of the European North of Russia
Current climate change is affecting forests and requires a specific forest management strategy. The review aims to analyze the impact of observed and projected climate change on the tree species adaptation response with...
Applying Sulfite Liquors as a Nutrient Medium for Cultivation of Lactic Acid Producer Rhizopus oryzae F-1030
The filamentous fungi Rhizopus oryzae are well known for their ability to hydrolyze plant polysaccharides. Representatives of this species are widely used for the production of various products, such as organic acids (la...
Substantiation of the Technology of Mechanized Clear-Cutting of Reservoir Beds and Equipment Arrangement for Its Implementation
The issue of cleaning reservoir beds during the construction of cascades of hydroelectric power plants is relevant. In current practice, forest clearance is carried out in the form of clear-cutting 15–20 years before the...
Algorithm and Measurement of Forest Cover Area Change in the Khachmaz Region of Azerbaijan by Satellite Monitoring
The article presents the results of long-term observations of the forest cover state in the Khachmaz region of Azerbaijan. Both the results of Earth’s remote sensing and the data of earlier observations carried out by fi...