Determination of the Mathematical Dependence of the Black Liquor Density on the Dry Matter Content (High Yield Softwood Pulp)
Journal Title: Lesnoy Zhurnal (Russian Forestry Journal) - Year 2021, Vol 8, Issue 1
Abstract
A modern evaporator station is an energy-saving production of evaporated liquor with high dry matter content for ensuring the minimum SO2 emissions from the soda recovery boiler. Such stations are equipped with Falling Film devices and consist of 5–7 stages. The necessity to improve and create new black liquor concentrators is driven by the increased attention to environmental issues and the wish to produce liquor with a higher calorific value. The physical properties of black liquor depend on its composition and have a significant impact on the selection and design of evaporators. The main properties considered in the evaporation and combustion processes are density, viscosity, surface tension, heating value and boiling temperature. One of the most important characteristics of the liquor evaporation is its viscosity, since it determines the ability of the liquor to pump and affects the design features. Another equally important characteristic is density. With its help, the dry matter content and evaporation process in the main stages of the liquor regeneration are regulated. The study was carried out to determine the mathematical dependence of the black liquor density on the dry matter content for high yield softwood pulp. The study objectives were the following: analyze the effect of the dry matter temperature and concentration on the density of black liquor obtained from cooking high yield softwood pulp according to the technological flow of production; develop a mathematical model of dependence of the black liquor density of high yield sulphate softwood pulp on the concentration and temperature; conduct the TAPPI comparative testing of the results of mathematical and correlation dependences. A mathematical dependence of the black liquor density on the temperature and dry matter content required for immediate technological calculations of chemical regeneration departments in sulphate production of semi-finished products for cardboard was obtained. The following equation of mathematical dependence based on the conducted research, regression analysis, and mathematical processing of the results was obtained: ρ = 0.974 + 0.0071x – 0.0002t – 0.000007xt – 0.00000045t2 – 0.0000045x2 (where ρ – density, g/cm3; x – dry matter content, %; t – temperature, °C). It allows calculating with the highest accuracy the density of black liquor obtained from cooking high yield softwood sulphate pulp. Comparative testing of the results of the developed mathematical dependence and correlation dependence (published by TAPPI) of black liquor density on the dry matter content was carried out. A high level of comparability of the proposed mathematical equations was found.
Authors and Affiliations
Yu. V. Sevastyanova, Е. А. Toptunov, N. V. Shcherbak, P. V. Solntsev
Keywords
Related Articles
- EP ID EP692609
- DOI 10.37482/0536-1036-2021-1-192-200
- Views 173
- Downloads 0
Zoning of Catchments of Small Rivers in the South of the Volga Upland by the Water Protection Role of Forests
The article presents the results of the spatial distribution analysis of protective forest plantations within the catchment basins of in the south of the Volga Upland (within the Volgograd region). The data obtained are...
Improving the Technology of Reforestation in Cuttings with the Use of Energy-Efficient Tractors
Currently applied partial reforestation in cuttings and removal of stumps by uprooting have a number of significant technological, environmental and economic disadvantages. These are removal of the humus layer of soil ou...
Cultivation of Dunaliella salina Microalgae in the Nutrient Medium from Neutral-Sulfite Alkalis
The effectiveness of cultivation of microalgae Dunaliella salina in the nutrient medium from neutral-sulfite alkalis obtained during the production of cellulose from birch wood, with additional sodium chloride addition w...
Fatigue Strength of Band Saws
One of the major disadvantages of band saws is their low durability. Breakages during the operation are mostly caused by fractures in notches between the blades of the band as a result of the fatigue phenomenon. The stre...
Technological Resources of Harvesting and Logging Machinery of Bashkortostan Forestries
The forest sector of the Russian economy is a complex system of industries and activities, which include logging, woodworking, furniture and pulp and paper productions. The logging organization, which forms to a great ex...