Analysis Evacuation Route for KM Zahro Express on Fire Condition using Agent Based Modeling and Fire Dynamics Simulatior
Journal Title: International Journal of Marine Engineering Innovation and Research - Year 2017, Vol 1, Issue 4
Abstract
Safety is the thing that needs to be preferred by users of transport, passengers should also understand about safety procedures and evacuation procedures in the means of transport. There have been many accidents that happen in the world of transport, particularly in the shipping world, from 2010 to 2016 is no more than 50 accidents of ships in accordance with the cause recorded by KNKT (Komisi Nasional Keselamatan Transportasi). On this research was discussed the evacuation time on the ship KM Zahro express that occurred earlier in the year 2017 in the Kepulauan Seribu, DKI Jakarta. Almost all passenger dead caused by fire from power source in engine room. This thesis will explain about evacuation time and dangers from fire that interfere the process of evacuation. The methods used are Agent Based Modeling and Simulation (ABMS) and Fire Dynamics Simulator (FDS) for modeling fire simulation. Agent-Based Modeling software (pathfinder) and Fire Dynamics Simulator software (pyrosim) are used to calculate time evacuation in normal condition and fire condition of KM Zahro Express. Agent-Based Modeling and Simulator (ABMS) is a modeling method that aims to model complex problems based on real cases. Agent-Based Modeling and Simulator (ABMS) is designed to model a place that has a seat, path, exit door, humans, and others. Pyrosim is a graphical user interface for the Fire Dynamics Simulator (FDS). FDS models can predict smoke, temperature, carbon monoxide, and other substances during fires. In this case the existing models can be used to plan and prepare an emergency if unwanted things happen. As well as using basic rules which refer to the Safety Of Life At Sea (SOLAS) and International Maritime Organization (IMO). Result of Evacuation simulation calculation on emergency conditions (two rear exit doors will be closed) that match at actually condition is 29,783 minutes (response is not taken in this simulation), calculation results obtained from simulation of evacuation (Traveling Time) and at the count expanded feet according to the IMO formula (performance standard). From fire simulation could be analyzed the time and the amount of smoke on deck. It can be seen that in the 1800 seconds smoke levels produced in the relatively high place so disturbing in the evacuation process.
Authors and Affiliations
Trika Pitana, Muhammad Badrus Zaman, Dioco Carlos Kristian Perdana, Aleik Nurwahyudi
Keywords
Related Articles
- EP ID EP221359
- DOI 10.12962/j25481479.v1i4.2781
- Views 180
- Downloads 0
Configuration Selection Based On Lifecycle Cost Of Subsea Production System: Case Of Indonesia Deepwater Field
Subsea tie back systems are important parts of oil and gas production project. The decision to select a subsea tie-back configuration with the objective goal of lowest lifecycle cost can be configured in multiple ways ba...
Damage Analysis of Elbow Fitting at Condenser Air Conditioning Cooling System
Elbow fittings is one type of fitting on the piping installation that serves to change the flow direction. With the sudden flow of changes, it will affect the physical condition of the elbow. The flow changes in the elbo...
Sustainability Checklist for Transport System Plan for Mangrove Eco-Park
Preservation of mangrove, like efforts on preservation of other natural ecosystem, is directly connected to sustainability. Eco-park as one model of mangrove eco-tourism is well accepted worldwide. Mangrove eco-park comp...
Study on Improvement of Indonesia Shipbuilding Productivity with Theory of Constraints
Indonesia is a big country having big population, huge area and huge Exclusive Economic Zone area. For world harmonized growth, it is quite important to realize steady economy growth on Indonesia. Growth of Indonesia’s s...
Development of Load Characteristic for The Main Engine and Its PLC Compatible Preparation in Cooperation with The Water Brake as The Generator
Water brake can be used in any application where a load brake is required on a rotational load. In the engine industry, dynamometer is used in conjunction with a power source and instrumentation to determine engine HP, T...