Development of Power Management System for Electric Power Generation in Tanker Ship Based on Simulation
Journal Title: International Journal of Marine Engineering Innovation and Research - Year 2017, Vol 1, Issue 3
Abstract
Power management system (PMS) for electric power generation in ship, in the case of tanker ship, is the system that has function to control and to monitor all generators in ship as the main electricity supplier for all electric equipments or installed load. The number of total load that supplied by generator depends on the frequency of the use of load itself which would be read in PMS as well. It leads the operator to take a decision on how many generator should be operate whether in parralel or stand alone operation to fulfilling the power needs. Those loads should be grouped into essential and non essential load. This groups affecting the performance of the generators, where it will covers the maximum load at 306.67 kw under the condition of all electric equipments are operated well while the cargo handling of tanker ship is on process. However, in the state of emergency while the non essential electrical equipments are being cut off trough PMS, the generator will only covers the the maximum load at 253.88 kw to fulfilling the same needs. In the extreme case (total efficiency of parralel operation at 70%), the generators would cover the total load at 306.6 kw still by sparing the generated power of 52.72 kw.
Authors and Affiliations
Indra Ranu Kusuma
Keywords
Related Articles
- EP ID EP221258
- DOI 10.12962/j25481479.v1i3.2002
- Views 172
- Downloads 0
Analysis of Engine Propeller Matching of DC Motor as a Main Propulsion
The development of ship always searches through the most benefits system for reducing costs of propulsion system without increase pollution. Diesel propulsion system or also known as conventional propulsion system is eff...
Evaluation of Container Terminal Arrangement By Computer Simulation
With growing ship size and demand for effective handling of container cargoes in recent years, automation has inevitably took place in almost all aspect of modern terminal operation. So far, automation has been led by th...
Damage Analysis of Elbow Fitting at Condenser Air Conditioning Cooling System
Elbow fittings is one type of fitting on the piping installation that serves to change the flow direction. With the sudden flow of changes, it will affect the physical condition of the elbow. The flow changes in the elbo...
Analysis of the Suppression Device as Vortex Induced Vibration (VIV) Reducer on Free Span using Finite Element Method
Subsea pipeline is a transportation infrastructure of oil and gas as an alternative for ship tanker. The uneven topography surface of the sea floor resulting the pipe undergoes free span. The free span is a condition end...
Analysis of Lift and Drag of Mono-foil Hysucat due to Longitudinal Foil-placement Variation
CFD simulations were conducted to study the effects of a hydrofoil and its relative placement in the longitudinal direction on the total resistance of a mono-foil hysucat (hydrofoil supported catamaran). Three foil posit...