Performance and NOx Investigation on Diesel Engine using Cold EGR Spiral Tube: A Review
Journal Title: International Journal of Marine Engineering Innovation and Research - Year 2017, Vol 1, Issue 3
Abstract
The world has the same problem to reduce emissions. Based the problem, many technologies invented to reduce the Emission. One of them is EGR (Exhaust Gas Recirculation). EGR is the most simpleNOx reduction by circulating potion of exhaust gas return into the combustion chamber. EGR system is often known by the name the hot EGR where exhaust gas circulation process without cooling system. This new Hot EGR system is designed by the addition of cooling system with air-cooled type. So that the circulating of exhaust gas to be cooled in advance in such that the mass of air increases.This research aims to study the performance and a reduction in NOX of diesel engine with EGR using addition of air cooling system. The experiments were used on diesel engine Yanmar TF 85-MHDI
Authors and Affiliations
Semin Semin, Adhi Iswantoro
Keywords
Related Articles
- EP ID EP221333
- DOI 10.12962/j25481479.v1i3.2372
- Views 180
- Downloads 0
Validation of Engine Performance for Tests on Ballast Water Heat Treatment Using Engine Waste Heat
Heat treatment has been considered as a suitable option for treatment of ballast water. Utilizing the waste heat from the diesel engine fresh water and exhaust gases would be an economic option. For recovering the heat f...
Analysis Of Electric Propulsion Performance On Submersible 60 M With Motor Dc 2x1850 Kw 380 V Using Ohmformer At Voltage 190 Vdc 10260 Ah And Without Using Ohmformer At Voltage 115 Vdc 10260 Ah
Electric propulsion system is ship propulsion system using electric motor to replace performance of main engine. Submersible ships use DC motor as electric propulsion system because DC motor has advantages of speed contr...
Modelling of LPG Ship Distribution in Western of Indonesia using Discrete Simulation Method
The result of data from the Energy Outlook Indonesia issued by the National Energy Board, mentioned the demand of LPG every year continues to rise, and there is a regions has high increased still at western part of Indon...
Design of High Rate Blender Hydraulic Power Pack Unit on Stimulation Vessel – Study Case Stim Star Borneo for Offshore Operations at Delta Mahakam area – East Borneo
Application of Hydraulic Power technology in world industry today is still continue to increased. Not only in Industrial it’s self, but in Marine, Onshore and Offshore also use these technologies. Requirement of service...
Development of Load Characteristic for The Main Engine and Its PLC Compatible Preparation in Cooperation with The Water Brake as The Generator
Water brake can be used in any application where a load brake is required on a rotational load. In the engine industry, dynamometer is used in conjunction with a power source and instrumentation to determine engine HP, T...