Research on the Influence of the Complementary Phase Percentage on the Properties of Copper - Based Composites
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2014, Vol 37, Issue 3
Abstract
The article presents the method to obtain copper matrix composite with CuAl-Fe alloy particles as complementary phase. The samples were obtained by powder metallurgy methods using different percentages of complementary phase: 10, 20, 30, 40, 50% Cu-Al-Fe of average size of 100 μm. After cold pressing at a pressure of 863 MPa samples were sintered at 910 °C for 90 minutes. Characterization of the samples was focused on the microstructural aspects and abrasive wear behavior.
Authors and Affiliations
Simona BOICIUC, Petrică ALEXANDRU
Keywords
Related Articles
- EP ID EP587923
- DOI -
- Views 110
- Downloads 0
Researches on the Viscoplastic Behavior of a CrMo Alloyed Steel
The paper shows the results of the researches concerning the deformation behavior of alloyed steel with chromium and molybdenum. The plastic deformation behavior is researched in the experimental way, using the torsion t...
Physico-Chemical Water Treated with Sonic Generator and Al2(SO4)3 Coagulant
This paper is a study on the problem of using ultrasound in the treatment of raw water. It highlights the effect of ultrasounds produced by the experimental sonic ultrasound generator through the physico-chemical analysi...
Cu-Ag-Rear Metals for Wires: Processing and Characterisation
Cu based alloy microalloyed with rear metals (RM) (in our case, sample with Nb) for wires were prepared by two different techniques arc-melting and mechanical alloying. Microstructure characterisation was carried out by...
Electrochemical Corrosion Properties of SiC/Ni Nano-Composite Coatings in 0.5M NaCl
Nano particles have an influence on nickel electrocrystallisation steps: decreasing charge transfer resistance and activating the nickel reduction. The SEM – EDX surface morphology and TEM structure of the electrodeposit...
Influence of Secondary Refining Treatments on the Quality of HighGrade Steel Used in Oil and Gas Industry
Steel is the most important alloy used in oil and gas industry from production and processing to the distribution of refined products. In this research is analyzed the production technology of steel intended for long pip...