Risk Based Inspection of Gas-Cooling Heat Exchanger
Journal Title: International Journal of Marine Engineering Innovation and Research - Year 2017, Vol 1, Issue 4
Abstract
On October 2013, Pertamina Hulu Energi Offshore North West Java (PHE – ONWJ) platform personnel found 93 leaking tubes locations in the finfan coolers/ gas-cooling heat exchanger. After analysis had been performed, the crack in the tube strongly indicate that stress corrosion cracking was occurred by chloride. Chloride stress corrosion cracking (CLSCC) is the cracking occurred by the combined influence of tensile stress and a corrosive environment. CLSCC is the one of the most common reasons why austenitic stainless steel pipework or tube and vessels deteriorate in the chemical processing, petrochemical industries and maritime industries. In this thesis purpose to determine the appropriate inspection planning for two main items (tubes and header box) in the gas-cooling heat exchanger using risk based inspection (RBI) method. The result, inspection of the tubes must be performed on July 6, 2024 and for the header box inspection must be performed on July 6, 2025. In the end, RBI method can be applicated to gas-cooling heat exchanger. Because, risk on the tubes can be reduced from 4.537 m2/year to 0.453 m2/year. And inspection planning for header box can be reduced from 4.528 m2/year to 0.563 m2/year.
Authors and Affiliations
Dwi Priyanta, Nurhadi Siswantoro, Alfa Muhammad Megawan
Keywords
Related Articles
- EP ID EP221361
- DOI 10.12962/j25481479.v1i4.2650
- Views 179
- Downloads 0
Designing Passive Harmonic Filter of Electric Propulsion System on Tanker Ship
Harmonic is a frequency defect that have some negative effect to the electrical network system. In a ship, electrical network system are interconnected to each other to another electrical consumer device. The effect will...
Flat Top Barge 300feet Design Using Portable Dynamic Positioning System
Portable Dynamic Positioning System has not commonly applied to the ship, especially on barge. Besides for Dynamic Positioning function, the system can be used as ship's main propulsion. By using this system, the ship ab...
Sustainability Checklist for Transport System Plan for Mangrove Eco-Park
Preservation of mangrove, like efforts on preservation of other natural ecosystem, is directly connected to sustainability. Eco-park as one model of mangrove eco-tourism is well accepted worldwide. Mangrove eco-park comp...
The Hull Strength of Marine Current Turbine Platform
Strength analysis of hull structure of marine renewable energy is crucial. The hull structure must be able to whitstand the harsh environmental load such as wave, wind and the weight of the payload and the structure itse...
Fluid Flow Analysis of Jacket Cooling System for Marine Diesel Engine 93 Kw
The main function of cooling system is to control the temperature in the engine. To know the flow in the jacket cooling system for marine diesel engine 93 KW and the couple simulation between 1D modeling and 3D modeling,...