Slurry Ice as a Cooling System on 30 GT Fishing Vessel

Abstract

Indonesia is the largest archipelago country in the world that has a sea area that is very spacious. Indonesian sea area is 5.8 million square kilometers and a coastline of 95 181 km has huge potential in the fisheries sector. In line with the need to further improve on the quality of the fish catch. One way to preserve fish is to use a slurry of ice. Slurry ice proved more effective preserving fishery products instead of using ice cubes. Ice slurry cooling system was designed and applied to the fishing vessel 30 GT. The cooling system uses a simple vapor compression system consists of five major components consisting of evaporator, condenser, compressor, and two pumps. In designing this system determined the type of refrigerant used in advance which type of refrigerant R-507a. Then do the design or selection of its main components. The design is only done on the evaporator. As for the other major components such as condensers, compressors, and pumps election in accordance with the specification of the power needed. After that dialakukan depiction of each system component. Then subsequently designing the laying of ice slurry cooling system components on a fishing vessel 30 GT. Through calculations using simple thermodynamic equations obtained cooling load on this system amounted to 32.06 kW. Condenser with a power of 40 kW. Compressor with power 12 kW. Pump with capacity 10 m3 / h. With memepertimbangkan space left on the ship in the ice slurry system design on the main deck of the ship to the efficient use of space on board. The power requirements of the generator vessel increases due to the addition of ice slurry system components therefore do replacement generator into the generator with a power of 100 kW and penambahn fuel tank to 6,000 L.

Authors and Affiliations

Alam Baheramsyah, Beni Cahyono

Keywords

Related Articles

Slurry Ice as a Cooling System on 30 GT Fishing Vessel

Indonesia is the largest archipelago country in the world that has a sea area that is very spacious. Indonesian sea area is 5.8 million square kilometers and a coastline of 95 181 km has huge potential in the fisheries s...

Sloshing Simulation of Three Types Tank Ship on Pitching and Heaving Motion

As an important part of a ship, tanker / cargo hold specifically designed to distribute the load to be maintained safely. In a related IMO classification of LNG carrier, there are a wide variety of types of LNG tanks on...

Design of Catamaran Propulsion System with Demihull Distance Variation on Hospital Ship

Various problems faced by health services in the area of remote islands based on survey data Ministry of Health, that limited human resources in health and treatment facilities, as well as the difficult geographical cond...

Simulation of Double Walled Pipe Impact to Crude Oil Flow in Subsea Pipeline System

Crude oil contains mixed of hydrocarbons, the most commonly found molecules are alkanes (paraffins), cycloalkanes (naphthenes), aromatic hydrocarbons, or more complicated chemicals. In the process of taking crude oil in...

Analysis of Electrical Power Consumption in Container Crane of Container Terminal Surabaya

Container crane electrification is a re-powering process of container cranes from diesel to electricity. In electrification process, it is required an analysis of electrical power consumption that is needed in the operat...

Download PDF file
  • EP ID EP221256
  • DOI 10.12962/j25481479.v1i3.2005
  • Views 190
  • Downloads 0

How To Cite

Alam Baheramsyah, Beni Cahyono (2017). Slurry Ice as a Cooling System on 30 GT Fishing Vessel. International Journal of Marine Engineering Innovation and Research, 1(3), 136-142. https://www.europub.co.uk/articles/-A-221256