A Custom Firmware and Lightweight Battery System Design for Portable RFID Reader
Journal Title: Jurnal INFOTEL - Year 2018, Vol 10, Issue 2
Abstract
Small to large-scale companies mostly have warehouses to store their inventories, and to manage them a warehouse management system is required. A low cost, yet powerful solution is using a portable RFID reader. In RFID portable reader system, there are three components which are the most essential, i.e. host and its firmware, RF module, and battery.. In this paper, we propose a custom firmware design, which is compatible with different RFID reader chips or development boards. The custom firmware is designed to work by triggering the execution of Electronic Product Code (EPC) Generation 2 protocol standard command on the reader chip. Hence, the firmware can fully utilize the reader chip’s command. Furthermore, a lightweight battery system is also designed. Targeting for a high mobility use, a very lightweight Li-Pro battery, weighing of only 0.1 kg, is used for the battery system. It is also able to work at long operating hour up to 4 hours.
Authors and Affiliations
Hans Kasan, Trio Adiono, Suksmandhira Harimurti, Farkhad Ihsan Hariadi
Analisis Link Budget Non Direction Beacon pada Komunikasi Jalur Lintasan Penerbangan
One of the propagation attenuation that should be calculate when using radio communication in air navigation is atmospheric propagation attenuation at night. The presence of propagation attenuation will decrease acceptan...
Pembangkit Sinyal Master Pada Sistem Navigasi LORAN-C menggunakan FPGA
Nowadays navigation system is very important to support human life, it can even be used as a defense system of a country. Now, Indonesia relies on the navigation system of other countries, therefore Indonesia needs an in...
Analisa Karakteristik Teori Antrian pada Jaringan IP Multimedia Subsystem (IMS) Menggunakan OPNET Modeler 14.5
Telecommunications technology development growth rapidly, drive the telecom operators and vendors to provide safe, fast, and multi-purposed services, to encourage the creation of a diverse ecosystem of telecommunications...
Analisis Perhitungan Cakupan Sinyal Sistem Wcdma Pada Area Kampus Akademi Teknik Telekomunikasi Sandhy Putra Purwokerto
Perkembangan industri wireless saat ini mengalami kemajuan sangat pesat. Teknologi 3G yang ditetapkan oleh ITU akan berperan sangat penting dan semakin dominan dalam perkembangan teknologi komunikasi. Dengan berkembangny...
Performance Comparison of Dispersion Compensation Schemes Using DCF in DWDM Optical Network
The dense wavelength division multiplexing (DWDM) system enhances bandwidth capacity for long-haul communications system, but the system performance is affected by a chromatic dispersion especially in the high bitrate co...