A Review on Thermodynamics Analysis and Waste Energy Utilization in Cement Industry
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2017, Vol 7, Issue 6
Abstract
In India, cement manufacturing process consumes about 15-20% energy among all the energy consuming industries. Reduction in energy consumption in cement production process is the prime concern. Therefore, detailed review on the energy use and reserves is essential to find out energy wastage so that essential actions could be applied to decrease energy consumption. In this paper energy use at different sections of cement industries based on the thermodynamic analysis specially Exergy analysis, alternative fuel used for cement kilns, various energy savings measures were reviewed and presented.
Authors and Affiliations
Sachin Verma, Sudhir Y Kumar
Keywords
Related Articles
- EP ID EP252483
- DOI -
- Views 132
- Downloads 0
EXPERIMENTAL RESEARCH IN SMAW PARAMETER TO MINIMIZE THE RESIDUAL STRESS AND ANALYSIS FOR ELIMINATE COLD CRACKS
In a perfect earth all materials would match thro-ugh being without error, together in their mechanical and chemical structure. It would definitely make simpler welding, especially when choosing filler materials. So far...
EXPERIMENTAL INVESTIGATIONS OF EFFECT OF HEATED ABRASIVES ON ABRASIVE JET COATING REMOVAL RATE ON THE SOFT BASE MATERIALS
Coating removal is an important process during the recondition and recoating process of ship base section, bigger structures, marine components, windmill wings and other engineering components. It is essential to remove...
Optimization of Process Parameters of Friction Stir Welding of Aa 6082-T6 Using Grey Based Taguchi Method
Friction stir welding process is a mushy state joining technique and is extensively used for unification of similar and dissimilar metals employed for aerospace, automobile and other fabrication industries. Friction stir...
Analysis of Tube Failure in Economizer and Super Heater Tube in Thermal Power Station
Boiler tube failure continues to be the leading cause for forced outages in fossil fired boiler. The tube failure may be a simple problem, unless it causes damage to the power plant and affects safety of the human being....
Design And Analysis of Connecting Rod Material Made By B4c Reinforced Al7075 Alloy Heat Treated Composites
Connecting rods are highly stressed members in engines; connecting rods are also called as CON rods are subjected to alternative tensile and compressive loads with inertia loads. Inertia plays a major role in high speed...