A System Diagnosis using Descriptor Model with a Constrained Dynamic Motion in a Robot Gripper
Journal Title: Scholars Journal of Engineering and Technology - Year 2014, Vol 2, Issue 5
Abstract
This research illustrates a method to diagnose a system regarding to an automatic screw or welding assembly line via the industrial robot that builds a constraint system with counterparts at the moment of working. The timely righteous estimation and judgment of the states is very important for the safe operation in time domain system. The synthesis of this problem presumes that all state variables are observable for concerned system. But it seems that it is not feasible to measure all modes of states of velocities, accelerations, forces and moments directly. A practical solution to this problem, which should be tried, is the estimation of the states or its velocities by the use of an observer which can estimate a system characteristics of linear or nonlinear states and effects as a mode, so called, “ Indirect measurement”. For this procedure, the mathematical model of the concerned physical system which consists of links over joints and Gripper with the end effector, is derived with the significant remarks such as friction, gravitation, and Coriolis force. This is a basic system. The concrete assignment is to design the observer that estimates the characteristics of the states and velocities based on the measurement vectors. The main artifice is to approximate the characteristics with a fictitious model that may describe the modes of system errors. As a practical and convenient fictitious model, the characteristics of nonlinear effects are assumed as approximately stepwise contact. An identity observer is obtained whose state variables are the estimate of the state variable of the corresponding “observer system”. It consists of a simulated model with a correction feedback of the estimation Keywords: Diagnosis, Observer, Mode, Indirect measurement, Descriptor Model
Authors and Affiliations
Raiwung Park
Keywords
Related Articles
- EP ID EP385183
- DOI -
- Views 81
- Downloads 0
Intelligent control of tunnel emergency evacuation signs under fire condition
With the development of traffic cause, tunnel number increased year by year. At the same time, the tunnel fire accidents at home and abroad in recent years has caused a large number of casualties and property losses. The...
The calculation method for a kind of definite integral
This paper discussed this kind of definite integral. ( is n-th Qibixiaofu polynomial, ) The conclusion is when n is even number, . And when n is odd number, Keywords: Definite integral；odd function, Mathematical...
The Investigation and Analysis of Mathematics Education Practice Courses in local Undergraduate Colleges
Mathematics Education Practice Courses are important ways which normal students linking theory with practice and get under the tutelage of the actual ability to teach and to improve the overall quality. This paper invest...
Experimental Investigation for the Magnetic-Caloric Effect on the Refrigeration Cycle Performance
The present research aims to investigate experimentally applying of the magnetic-caloric effect on the performance of vapor compression cycle. Three levels of magnetic fields of 1300, 2400, and 3600 Gauss are used and tw...
Conceptual Design for Computer Aided Manufacturing (CIM) in Production of Palm Kernel Oil
This paper work analyzes and develops an improved method of getting quantity and quality palm kernel oil .The computer integrated system is using full digital automation and computer monitoring production process replaci...