A Technical Review on the Study of Stability Analysis of Non-Circular Bearings Lubricated with Newtonian/Non-Newtonian Fluids
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 1
Abstract
In recent years, applications of non-Newtonian fluids as lubricants have received great interest since the use of these non-Newtonian lubricants showed an increase in load carrying capacity and reduction in frictional force with the esca-lation in additives concentration. The demands of the present day industry rotating machinery includes high speed, compactness, light weight engines, high operating loads, high power transmission, high efficiency, and high perfor-mance of the engine. As a result of high speed machines, bearings are inclined to have excessive power loss and increase in oil temperature. The former reduces the efficiency of the engine and the latter causes the undesired changes in the lubricating oil. The plain journal bearings at high rotation speeds are subjected to instability like oil whirl and whip ruining the bearing and also the machine. Therefore, this poses a need to change in the bearing design. In the present paper, an attempt is made to briefly introduce the various non-linear models used and the different approaches that have been carried out by the researches in the past few years to improve and achieve the stability of journal bearing along with enhanced performances and characteristics.
Authors and Affiliations
A. R. Amar Murthy, Raghunandana. K
Mechanical, Morphological and Thermal Properties of Alkali Treated Grewia Orbiculata Rottler Fiber
This article manifests the extraction and characterization of uniaxial fibers from the barks of Grewia Orbiculata Rottler plant. Grewia fibers after retting were treated with 5% sodium hydroxide solution. The alkali trea...
Study the Effects of Carbon Nano Tubes on Corrosion Behavior of Ni-Pelectro-Less Coating of Low Alloy Steels in Salt Water
The basic aim is to study the resistance of corrosion and hardness of heat treatment of coatings with electro-less NiP-CNT. Various concentration of CNTs ranging, 0, 0.1, 0.2 and 0.4g/L in Ni-P-CNT composite was deposite...
Comparison of Wall Temperatures on Scramjet Inlets at Hypersonic Velocities
Skin frictions produced at high operational speeds generate lots of heat on the surface of the aircrafts. It is very much essential to determine the quantity of the heat produced on the outermost layer of the vehicle dur...
Performance and Emission Characteristics of Cashew Nut Shell Pyrolysed Oil – Waste Cooking Oil With Diesel Fuel in a Four Stoke Di Diesel Engine
India is considered as the fourth largest energy consumer in the world after the United States, China, and Russia. India’s energy consumption is increasing in a relatively faster rate in the recent years, due to populati...
The Design and Analysis of Electric Vehicle Gearbox Casing
This study includes Design analysis on the use of the Finite Elements Analysis method for two speed electric busses gear boxes. When designing the gearbox, the strength of the transmission system is very important. Using...