A Typical Surface Formations Found on the Corrosion Layer of Iron Artefacts
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2009, Vol 32, Issue 1
Abstract
The paper presents the experimental results obtained by applying non-invasive methods (OM, SEM-EDX, XRF) on two iron artefacts from the IInd and the IIIrd centuries A.D. (discovered in the incineration graves from Gabăra-Moldoveni and Văleni-Boteşti, Neamt County), for determining the surface and the internal microstructures (cross-section), corrosion products distribution and some atypical formations resulted from the incineration processes. The results allow the rendering evident of some attributes used in authentication, the determination of the conservation state and the establishing of the proper procedures for the active conservation and the restoration of the artefacts.
Authors and Affiliations
Otilia MIRCEA, Ion SANDU, Ioan SÂRGHIE, Andrei-Victor SANDU
Keywords
Related Articles
- EP ID EP658698
- DOI -
- Views 89
- Downloads 0
Contributions in the Domain of the Contact Stresses Between Cylinders of Cold Rolling
Elasto-plastic contact stresses between working cylinder and support cylinder of cold rolling using FEM are presented in this paper. Pressure and tractions resulted from the rolling process were obtained by using a calcu...
Experimental Studies Regarding the Implementation Possibilities of a Quality Control System for Ceramic Products in Continuous Flux Production
In the current paper the authors studied the possibilities and limitations of a system intended to evaluate the quality of ceramic products directly on the production line. The system is based on a data mining specific a...
Evaluated Work System and Environmental Risk for a Worker in Drilling for Methane Gas
Improving the safety and health at work is important not only in terms of human view, in order to reduce possibilities of accident to workers, but also as a way to ensure the success and durability work for a worker in d...
Composite Coating in Copper Matrix with Molybdenum in Dispersion Phase Obtained by Electrochemical Methods
The paper describes reviews referring to determination of working parameters of the development processes of composites in copper matrix, obtained by electrochemical deposition methods. The molybdenum particles having pa...
Influence of the Furnace Temperature in Continuous Flux Quenching on the Characteristics of Low Carbon Steel Straps
In this paper there are presented mechanical characteristics (resiliency, elongation) and structural characteristics resulted from quenching thermal treatment made on an experimental installation, in continuous flux, on...