ACCURACY OF DETERMINATION OF TWO DYNAMIC MICROOBJECTS PARAMETERS WITH TELEVISION SCANNING OPTICAL MICROSCOPE
Journal Title: Вісник Національного університету "Львівська політехніка", серія "Радіоелектроніка та телекомунікації" - Year 2013, Vol 766, Issue 2013
Abstract
At the present stage of technological development there are more problems associated with micro- and nanotechnology. Among such problems occupy an important place task analysis of dynamic processes and several dynamic microobjects (MO) parameters simultaneously in view of the microscope in different fields (medicine, microbiology, ecology, microelectronics etc.). Identification number of dynamic parameters (for example, mobility) of some living cells and their components occurs mainly by using optical microscopy methods. To determine the mobility is most often used in two ways: 1) the method of fluorescence microphotographs analysis; 2) the method of quantitative fluorescence confocal laser scanning microscopy. Using these methods were quantitatively and qualitatively describes the process of intracellular transport, particularly cytoplasm-nuclear, kinetic accumulation in the nucleus of cells of different types of proteins, localization of drugs aimed at developing ways to intracellular delivery of anticancer drugs. To solve these and many such important tasks in the fields of medicine and microbiology can be successfully used television scanning optical microscope (TSOM) based on cathode ray tubes ultrahigh resolution, as provided in this scan resolution up to 0.1 ... 0.2 micron. This article contains analysis of the capabilities of this microscope in the case of the simultaneous study of several MO, which are move randomly - with variable speed and direction of motion. The basic principles of TSOM work in determining the dynamic parameters of separate MO and averaged parameters of several MO are submitted. Track each individual MO occurs by the use of scan mode of miniraster, the center of which the current frame is formed with coordinates that correspond to coordinates of the center of the MO in the previous frame scan. Interval of definition of coordinate position of each MO in sight of TSOM corresponds to the duration of one frame scanning at a constant speed scanning. Dimensions of the scanning raster should be reduced to the values 1...10% of the full-scale raster, while receiving miniraster. However, a scan should be used for MO of proportionate size with minimal scanning spot that move randomly at high speed. Among the MO for which the use of the scanning mode is not appropriate, you can select one or several MO simultaneously with large size (5...40% of the full-scale raster in the plane of study). For such MO should be used only scanning with a full-scale square raster. Based on these considerations, we construct a mathematical model of the scanning process and analyze the significance of dynamic parameters which can be determined by TSOM using scan mode with a full-scale raster and tracking each MO by miniraster.
Authors and Affiliations
Volodymyr Shkliarskyy, Yuriy Matiieshyn, B. Hudz
Keywords
Related Articles
- EP ID EP460988
- DOI -
- Views 139
- Downloads 0
SPICE MODEL OF QUADRATURE SYNCHRONOUS DETECTORS FOR IMPEDANCE MEASURING TRANSDUCER
The task of impedance measurement transducers’ SPICE simulation is presented. Wide range of impedance spectroscopy microelectronic sensors, namely, for Internet of things, are based on such measurement transducers. One o...
CALCULATION OF THE SELF-SIMILAR TRAFFIC CHARACTERISTICS WHICH IS AN APPROXIMATION TO THE PARETO DISTRIBUTION
The model of self-similar traffic is widely used, but some tasks of assessing the quality of service in the packet network are unresolved. It is known that in the presence of self-similarity properties in the incoming st...
RESEARCH ON THE TRAFFIC AGGREGATION PROCESS IN OPTICAL BURST SWITCHED NETWORKS
Next generation optical networks should provide high capacity to support ever increasing traffic demands. Many technologies have been developed recently for optical transport networks to increase throughput, improve ener...
ANALYSIS OF RAIL DEFECTS SIGNALS BY THE MATLAB WAVELET TOOLBOX PROGRAMME
Rail networks across the world are getting busier with trains travelling at higher speeds and carrying more passengers and heavier axle loads than ever before. The combination of these factors has put considerable pressu...
ALGORITHMIC SOFTWARE OF A TELEVISION SCANNING OPTICAL MICROSCOPE WORK IN THE STUDY OF DYNAMIC MICROOBJECTS
The questions concerning algorithmic software of the work of a television scanning optical microscope (TSOM) during research and determination of various parameters and characteristics of single and group dynamic microob...