AN ANALYSIS OF THE LOAD-BEARING CAPACITY OF TIMBER-CONCRETE COMPOSITE BEAMS WITH PROFILED SHEETING
Journal Title: Civil and Environmental Engineering Reports - Year 2017, Vol 4, Issue 27
Abstract
This paper presents an analysis of timber-concrete composite beams. Said composite beams consist of rectangular timber beams and concrete slabs poured into the steel sheeting. The concrete slab is connected with the timber beam using special shear connectors. The authors of this article are trying to patent these connectors. The article contains results from a numerical analysis. It is demonstrated that the type of steel sheeting used as a lost formwork has an influence on the load-bearing capacity and stiffness of the timber-concrete composite beams.
Authors and Affiliations
Maciej SZUMIGAŁA, Ewa SZUMIGAŁA, Łukasz POLUS
Keywords
Related Articles
- EP ID EP270316
- DOI 10.1515/ceer-2017-0057
- Views 87
- Downloads 0
Potassium permanganate as an oxidizing and flocculating agent in groundwater treatment
The effectiveness of groundwater treatment with a high amount of organic substances and general iron depended on the kind of oxidizing agent, the kind and dose of coagulant, and the time of sedimentation. The effectivene...
THE PROBLEM OF FORM IN OBJECTS UNDER REDEVELOPMENT (ON THE BASIS OF BYTOM MARKET SQUARE REDEVELOPMENT DESIGN)
The author believes that if a designer has performed many design or research works entailing solutions to various problems, it is recommendable to consider and become aware of previously used methods whose application mi...
Meteorological data in the simulation of combined system work conditions
In the paper results of combined system work simulation basing on rainfall data were shown. Rainfall height values were read for three time interval precisions: 10, 30 and 60 minutes. The last event corresponds with prec...
PROPOSAL FOR DETERMING THE SCALE OF RENOVATION NEEDS OF RESIDENTIAL BUILDINGS
The scope of renovation works depends, above all, on the state in which a historical site has been preserved. All actions ought to be preceded by an assessment of the technical condition of the buildings. The article pre...
TEMPERATURE IMPACT OF NITROGEN TRANSFORMATION IN TECHNOLOGICAL SYSTEM: VERTICAL FLOW CONSTRUCTED WETLAND AND POLISHING POND
The article describes the results of the research, purpose of which was to evaluate influence of the temperature on the effectiveness of nitrification and denitrification in the sewage treatment system consisting of vert...