An In-vitro Comparative Stereomicroscopic Analysis and Evaluation of Marginal Accuracy in Porcelain Fused to Metal Copings Fabricated in Two Different Finish Lines Using Variant Die Materials
Journal Title: Journal of Clinical and Diagnostic Research - Year 2017, Vol 11, Issue 1
Abstract
Introduction: Limited published information is available about the influence of preparatory designs and die materials on marginal accuracy of porcelain fused to metal copings using recently developed die materials. Aim: To detect the influence of margin geometries and dimensional accuracy of contemporary die materials on vertical marginal gaps in Porcelain fused to metal coping using a Stereomicroscope (three dimensional analysis). Materials and Method: Two chrome cobalt alloy models of mandibular first molars prepared to have shoulder and deep chamfer finish lines were CAD-CAM milled. Elastomeric impressions of these models were made in a custom tray, poured in Type IV Gypsum(n=10) and Resin modified Gypsum(n=10) and also packed with Epoxy resin (n=10) as a die material to form a total of 60 samples, 30 in each group (shoulder and deep chamfer). Wax patterns were fabricated, invested and castings in ceramic alloy were obtained in traditional manner. These copings were later analyzed on CAD/CAM models using stereomicroscope. Results: Both the designs did not exhibit significant difference (p<0.05). Whereas, the three die materials exhibited significant difference (p<0.05) by Two way ANOVA test and Tukey’s multiple Post Hoc test. Results from this study showed that vertical marginal gaps for copings fabricated on resin modified gypsum as a die material were within the clinically acceptable range. Conclusion: Margin geometries both shoulder and deep chamfer have equal influence on vertical marginal gaps in metal ceramic restorations. Copings fabricated on Epoxy resin dies exhibited highest value of vertical marginal discrepancy, where as least value was determined for copings constructed on dies fabricated from resin modified gypsum.
Authors and Affiliations
Priya L Vaswani, Pronob K Sanyal, Siddharth Y Gosavi, Abhijeet R Kore
Keywords
Related Articles
- EP ID EP328797
- DOI 10.7860/JCDR/2017/21370.9131
- Views 167
- Downloads 0
Adverse Events Associated with Plateletpheresis: A Tertiary Care Hospital Experience in Southern India
ABSTRACT Introduction: Platelet transfusions play a major role in preventing major haemorrhage and improve survival in severe thrombocytopenic patients. Generally, apheresis procedures are well tolerated. Systemic reacti...
Assessment of Microbial Contamination in Indoor Air of Private Maternity Homes in Moga, Punjab
ABSTRACT Introduction: Assessment of indoor air quality has become important as the bacteria and fungi are omnipresent. Human diseases caused by microorganisms can be classified as bacterial, fungal and viral infection a...
Isolated Traumatic Chronic Anterior Dislocation of Radial Head
Isolated traumatic anterior radial head dislocation is extremely rare and very commonly missed injury. A 12-year-old male had a fall on outstretched hand with pronated forearm. He presented after 6 weeks with complaints...
Comparative Analysis of Dexmedetomidine and Propofol Based Sedation Regimens on Anaesthetic Requirements in Cardiac Surgery with On-pump Cardiopulmonary Bypass
ABSTRACT Introduction: Dexmedetomidine is a selective α2-agonist that has been successfully used as an anaesthetic adjuvant in cardiac surgery. Aim: To evaluate the effect of dexmedetomidine on intraoperative requirement...
Aortic Knob Width as an Indicator of Cardiovascular Risk in Chronic Kidney Disease Patients
ABSTRACT Introduction: The most common cause of mortality in Chronic Kidney Disease (CKD) patients is due to cardiovascular events. The Aortic Knob Width (AKW) has been found to positively correlate with the severity of...