An Inverse Kinematics Analysis of Space Station Remote Manipulator System (SSRMS) Using Genetic Algorithms
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 1
Abstract
The importance of RobotArms (Serial Manipulators) is increasing rapidly in the last few years in space, industrial and medical applications. An important part of Robot Arms is to achieve desired pose (position and orientation), in order to accomplish this very good knowledge of inverse kinematics is needed. Getting a solution to Inverse kinematics of the Robot Arms has been considered as a mature problem which is thoroughly researched and is also on the focus of various research and developments in Robotics field. SSRMS (a redundant manipulator) has total 7 revolute joints. They can be structured as shoulder joints, elbow joints and wrist joints (end effector). This paper presents biologically-inspired Genetic Algorithms (optimization) approach for solving Inverse kinematics problem of SSRMS. In this paperGA solver from MATLAB’s (optimization toolbox) is used to find the joint angles of SSRMS robot, solver parameters such as population size, elite count, crossover fraction, etc. are selected to achieve maximum performance resulting in optimum joint variables.
Authors and Affiliations
Satyendra Jaladi, T. E. Rao
Keywords
Related Articles
- EP ID EP463859
- DOI 10.24247/ijmperdfeb201921
- Views 99
- Downloads 0
Performance Evaluation of Solar Cooker Made from Locally Sourced Materials
This study describes the development and performance evaluation of a four reflector solar cooker, which was made from locally sourced materials. Teak wood was used in the construction of the solar box cooker with the dim...
Fluid-Structure Interaction Analysis on Horizontal Wind Turbine Blade
The research and advancements in green-energy industries like wind energy system technology has gained an increased interest in twenty-first century due to the reduction of natural resources and thus requires the standar...
Microstructural and Corrosion Studies by Immersion in 3.5wt % NaCl Environment on Mg-6Al-1Zn-XCa Alloy with Ca Addition and Aged at different Temperatures
The effect of aging at different temperatures of 180ºC, 200ºC, 220ºC, and 240º C with various level of calcium (X=0.5, 1, 1.5, 2%) addition on Mg-6Al-1Zn-XCa alloy were investigated in 3.5Wt.% NaCl solution. The specimen...
Model of Estimation of Success of Geological Exploration in Perspective
In this article discusses the development of a system of interrelated mathematical models, algorithms and programs of the decision task according to the assessment, forecasting and risk management to reduce their values...
Surface Damages Caused by Cavitations at Hood of Howell Bunger Valve and Redesign to Avoid Them
Howell Bunger valve is hydro mechanic equipment which obtains regulation of free water stream with very high flow velocity at small opening. High flow velocity rates are the main reason for the occurrence of cavitations...