ANALISIS PERANCANGAN ALAT KHUSUS UNTUK PEMASANGAN SUSPENSI BELAKANG PADA UNIT HD785-7
Journal Title: SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin - Year 2018, Vol 12, Issue 2
Abstract
General Overhaul (GOH) is so much on the HD785-7 unit that it requires speed, accuracy, and discipline during the process so that the target can be met. Slow speed is influenced by several factors, one of which is the process of installing rear suspension. Now the rear suspension installation process is carried out by 6 manpower using belt-shaped tools that require installation time of ± 2 hours (1 piece) so that it is considered inefficient and unsafe for mechanics. The purpose of this research is to design special tools so that the process is faster, safer, and the number of mechanics decreases. The method used in this study is Seven Ups ++ Innovation Method so that innovation activities can run in rules and produce optimal output. The results obtained from the design of this special tool is that the rear suspension install process is only carried out by 3 manpower, is safer, and the installation time is ± 30 minutes (1 piece).
Authors and Affiliations
Rasma Rasma
Keywords
Related Articles
- EP ID EP669588
- DOI -
- Views 312
- Downloads 0
ANALISIS POTENSI REFUSE DERIVED FUEL (RDF) DARI SAMPAH PADA TEMPAT PEMBUANGAN AKHIR (TPA) DI KABUPATEN TEGAL SEBAGAI BAHAN BAKAR INCINERATOR PIROLISIS
The garbage dumping in Tegal Regency has reached 989.8 m3/day and increasing every year. The percentage of waste in Murareja landfill is dominated by plastic waste which is 40.15%. The plastic waste will be processed by...
TEKNOLOGI PROSES PENGECATAN MENGGUNAKAN SISTEM ATOMISASI PADA PRODUK BERBAHAN PLASTIK DI INDUSTRI PERAKITAN SEPEDA MOTOR
Motorcycles are a type of transportation that is familiar in Indonesia. Cost product and speed for mobilization are the main reasons for choosing this transportation. Demand for motorcycles that are still large in Indone...
PENDEKATAN KARAKTERISTIK RESPON GETARAN SISTEM 2 DOF SETELAH PENAMBAHAN INDEPENDENT DUAL TRANSLASIONAL DYNAMIC VIBRATION ABSORBER
Dual Translational dynamic vibration absorber (dDVA) is two DVA masses that can move in the translational direction and given into the system to reduce system-translation translational vibrations. The research about usin...
RANCANG BANGUN ALAT PENGATUR KERUCUT LALU-LINTAS SEMI-OTOMATIS
The management (pick and place activities) of traffic cones (KLL) is generally performed in traditional way where the operator of KLL management picks and places KLL by using their body power. Therefore, the speed and ef...
PENGARUH BENTUK BUKAAN TERHADAP KEKUATAN DAN GETARAN BALOK
Beam is widely used for building and mechanical structure. The beam characteristics must be able to answer the problem in field. In recent years, beam was made which compromised between stiffness and weight of beam. The...