ANALYSIS AND MODELING OF GENEVA MECHANISM
Journal Title: Journal of Industrial Design and Engineering Graphics - Year 2015, Vol 10, Issue 2
Abstract
The paper presents some aspects theoretical and practical based on the finite element analysis and modelling of Geneva mechanism with four slots, using the CATIA graphic program. This type of mechanism is an example of intermittent gearing that translates a continuous rotation into an intermittent rotary motion. It consists of alternate periods of motion and rest without reversing direction. In this paper, some design parameters with specify a Geneva mechanism will be defined precisely such as number of driving cranks, number of slots, wheel diameter, pin diameter, etc. Finite element analysis (FEA) can be used for creating a finite element model (preprocessing) and visualizing the analysis results (postprocessing), and use other solvers for processing.
Authors and Affiliations
HARAGA Georgeta, IONIŢĂ Elena, AVRAMESCU Ana-Maria
Keywords
Related Articles
- EP ID EP465374
- DOI -
- Views 86
- Downloads 0
VIRTUAL MODEL OF A ROLLER CONVEYOR INTEGRATED INTO A LOGISTIC FLOW
In this article is presented, with the help of graphics, a logistic flow for palletizing and wrapping operations. The loaded pallets are transported by means of a roller conveyor. Creating the virtual model for the conve...
MODELLING SYNERGISTIC EYE MOVEMENTS IN THE VISUAL FIELD
Some theoretical and practical considerations about eye movements in visual field are presented in the first part of this paper. These movements are developed into human body to be synergistic and are allowed to obtain t...
ISOLATED AERODYNAMIC SURFACE CALCULUS
The paper proposes to present a few steps for calculating the dynamics of flight. From an organizational perspective, the paper is structured in three parts. The first part provides essential information that needs to be...
VISUAL IDENTITY OF ENGINEERING GRAPHICS AND INDUSTRIAL DESIGN DEPARTMENT IN UNIVERSITY POLYTECHNICA OF BUCHAREST
This article aims at drawing a design plan of organizational identity to the Engineering Graphics and Industrial Design Department, University Polytechnica of Bucharest.
ENGINEERING DESIGN USING STANDARD CATALOGUES
This paper highlights various types of pre-existing parts in SolidWorks and CATIA referring to the possibility of creating new customized parts or blocks. These parts were intended to help those who work in this field an...