Analysis of Failure Causes and the Criticality Degree of Elements of Motor Vehicle’s Drum Brakes
Journal Title: Tribology in Industry - Year 2014, Vol 36, Issue 3
Abstract
The introduction of the paper gives the basic concepts, historical development of methods of Fault Tree Analysis - FTA and Failure Modes, Effects and Criticality Analysis - FMECA for analysis of the reliability and safety of technical systems and importance of applying this method is highlighted. Failure analysis is particularly important for systems whose failures lead to the endangerment of people safety, such as, for example, the braking system of motor vehicles. For the failure analysis of the considered device, it is necessary to know the structure, functioning, working conditions and all factors that have a greater or less influence on its reliability. By formation of the fault tree of drum brakes in braking systems of commercial vehicles, it was established a causal relation between the different events that lead to a reduction in performance or complete failure of the braking system. Based on data from exploitation, using FMECA methods, determination of the criticality degree of drum brake’s elements on the reliable and safe operation of the braking system is performed.
Authors and Affiliations
D. Ćatić , J. Glišović , J. Miković , S. Veličković
Keywords
Related Articles
- EP ID EP116404
- DOI -
- Views 120
- Downloads 0
Wear Behaviour of Hard Cr Coatings for Cold Forming Tools Under Dry Sliding Conditions
Cr hard coatings are largely used in industry in metal cutting and cold forming processes; This work on quantitative way represents improvement, in terms of wear resistance, which is obtained by depositing Cr hard coatin...
Experimental Investigation of the Friction and Wear Behaviour with an Adapted Ball-On-Prism Test Setup
In this study, the friction and wear behaviour of a brass-steel and a copper-steel pairing is investigated and compared. For this purpose, an adapted ball-on-prism test configuration is used. With the proposed test setup...
Solid Lubrication in Iron Based Materials – A Review
The wide choice of materials available today has posed a major challenge for designers and engineers to select the most suitable material and manufacturing process for any engineering application. The mechanical and trib...
Tribological Investigations of Hard-Faced Layers and Base Materials of Forging Dies with Different Kinds of Lubricants Applied
This paper gives a procedure for choosing the right technology for reparative hard facing of damaged forging dies. Since they are subject to impact loads and cyclic temperature elevations, forging dies should be made of...
Tribometry of Materials for Bioengineering Applications
Development of materials for biomedical implants (metals, polymers, ceramics and composites) is directly determined by characteristics and nature of the tissue, organs and systems that are being replaced or supplemented....