Analysis of Mechanical Strength for Nanosized Scandia Doped Dispenser Cathodes
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
Keeping in mind the end goal to enhance the mechanical quality and machining properties of Scandia Doped Dispenser cathodes when they are connected into Vacuum Electron Devices, an exertion has been used to build the W grain sizes while keeping up the uniform doping of nanosized Scandia molecule. By an enhanced fluid strong (L-S) doping process, powders made out of W grains of around 1-2 micron in breadths with consistently dispersed nanosized scandium oxide particles have been created. Cathodes developed by above powders showed better properties in machining operations like lathing, and comparable discharge attributes to that of SDD cathodes produced using the powders with fluid doping strategies
Authors and Affiliations
K. DINESH
Keywords
Related Articles
- EP ID EP280268
- DOI 10.24247/ijmperdfeb201891
- Views 69
- Downloads 0
Wear Behavior of Fe-Cr-V based Hard Facing Alloy on ASTM A105 Steel
Dynamic contact surfaces life rate depends on various factors, majorly it is influenced by wear between contact surfaces. Hard facing is one of ancient technique used to improve mechanical properties, majorly surface pro...
An Integration of Smart Grids with Demand Side Management and Renewable Energy: A Review
The scheduling and improvement of the intelligible smart grid (SG) system is a combined part of the revolutionary target of accomplishing the distributed energy generation and transmission. The progression based on the f...
Influence of Addition of Silicon on Mechanical Properties of Aluminium - Zinc Alloy
In this investigation, the experiment was conducted to analyze the mechanical properties such as Yield Strength, Ultimate Tensile Strength, Hardness on Al-Zn alloy of different composition Specimen 1 (89.4%Al4%Zn1%Mg0.6%...
EXPERIMENTAL EVALUATION OF PERFORMANCE OF AIR-CONDITIONING COMPRESSOR DUE TO AL2O3 NANOPARTICLES IN LUBRICATING OIL
Nanoparticles are being widely used in recent years, due to their advantages. Addition of nanoparticles leads to significant change in thermal properties of a fluid. A new engineering medium, called nanofluid attracted a...
CFD Analysis on Buble Growth and Bubble Departure in Pool Boiling
The process of bubble nucleation, growth and detachment are simulated using volume fraction method. As the bubble grows to a certain size, it will eventually detach from an active nucleation site, especially for the case...