ANALYSIS OF THE INFLUENCE OF PARAMETERS OF TANGENTIAL VIBRATIONS AND VELOCITY OF DRIVE ON FRICTION FORCE IN SLIDING MOTION
Journal Title: Tribologia - Year 2015, Vol 261, Issue 3
Abstract
The simulation analyses and experimental tests results of the influence of the direction and parameters of tangential vibrations and the velocity of drive on friction and driving forces in sliding motion are presented in this paper. The original computational dynamic models were used in simulation analyses. These models are described with additional comments. Very good consistency of simulation analyses and experimental tests results were achieved. It was demonstrated that the friction force in sliding motion in the presence of tangential vibrations strongly depends of sliding velocity.<br/><br/>
Authors and Affiliations
Mariusz LEUS, Paweł GUTOWSKI
Keywords
Related Articles
- EP ID EP257775
- DOI -
- Views 55
- Downloads 0
Analiza wpływu urządzenia badawczego na wyznaczenie współczynnika tarcia
W artykule przedstawiono wyniki pomiarów współczynnika tarcia przeprowadzone z wykorzystaniem różnych urządzeń badawczych. W badaniach uwzględniono różne pary skojarzeń materiałowych. Doświadczenia przeprowadzono na urzą...
Research on the tribological parameters for materials couples used for valves, valve guides and seat inserts
Research on the tribological properties of TiAl alloys used for valves mating with valve guides and seat inserts, made of cast iron, has been done. The aim of the research has been to obtain values of the coefficient of...
EFFECT OF GAS NITRIDING PROCESS ON TRIBOLOGICAL PROPERTIES OF CONSTRUCTIONAL STEEL
The paper presents the results of examinations of the structure and tribological properties of nitrided layers produced on constructional steels with use of controlled gas nitriding. The nitriding layers structure, hardn...
ASSESSMENT OF TRIBOLOGICAL PROPERTIES OF GEAR OILS
The results of the tribological test of fresh and used gear oils and model-polluted oils (containing water and solid substance) are presented in this paper. The scuffing load was determined in an updated Four-Ball machin...
DELAMINATION WEAR OF STEEL AISI 304 IN TRIBOCORROSIVE CONDITIONS
The paper presents the results on tests of corrosive and mechanical wear (tribocorrosion) of stainless steel AISI 304 in solution of 3.5% NaCl. The experiments were carried out on a technical stand with a model pair type...