Application eddy-current frequency balance for monitoring of material properties by unprofitable converters
Journal Title: Вісник Національного технічного університету "ХПІ". Серія: Проблеми удосконалювання електричних машин і апаратів. Теорія і практика - Year 2015, Vol 13, Issue 1122
Abstract
It is shown that electromagnetic converters based on the use of eddy-current frequency balance, allow almost completely to get rid of the influence (effect) of air gaps between the converter and a controllable detail. They may be used successfully for monitoring of electromagnetic properties of ferromagnetic materials on frequency balance. It allows the use of digital metering equipment without intermediate transformations.
Authors and Affiliations
V. F. Bezotosnyj, V. V. Kozlov, O. V. Nabokova
Keywords
Related Articles
- EP ID EP408787
- DOI -
- Views 115
- Downloads 0
Evaluation of the actuator throttle device
Performed to evaluate the performance of the module, providing mode control throttling of natural gas. On a mathematical model of the module throttle control based on an induction motor analyzed transients move throttlin...
Optimal control of the work of the hybrid electric energy system with renevable sources of energy
Were developed an optimal system of automatical control for mode of hybrid electric power supply system with renewable energy sources, that let increase the maximal active power generation level in the case when were mai...
Spectral analysis of measured voltage on pick-up coil of eddy current sensor
Spectral analysis of measured voltage on pick-up coil of eddy current sensor in case of noise presence in a signal is made. Main components of noise that influence the measured voltage are found. Here such components are...
Development latch short-circuit for overhead power line voltage of 110 - 150 kV
Proposed a simple design of electromechanical latch short-circuit for overhead power line voltage of 110-150 kV. For the selected constructions shows a method of calculating its technical characteristics. Experimentally...
Step voltage converter as an alternative source for magnetic pulse metal working systems and induction heating systems
The use of preliminary induction heating of the working zone of magnetic-pulse sheet metals working can improve its efficiency and expand the existing range of technological operations for contactless metal working. Inte...