APPLICATION OF TAGUCHI METHOD FOR THE SELECTION OF OPTIMAL PARAMETERS OF PLANETARY DRIVING GEAR
Journal Title: Applied Engineering Letters - Year 2016, Vol 1, Issue 4
Abstract
An experimental research is performed in this study in order to optimize the parameters of planetary driving gear. An orthogonal array and analysis of variance (ANOVA) are employed to investigate the factors: material, module and gear width on the safety coefficient for surface durability. Statistical methods of signal to noise ratio and ANOVA with 95% confidence were applied to quantify the effects of considered factors as well as to obtain the minimum value of the safety coefficient for surface durability. The results of this analysis have shown that the gear module with 80.953% has the greatest influence on the safety coefficient for surface durability of the gear. The second influential factor is a gear width with 18.392%. And the material with 0.615% has the least influence on the safety coefficient for surface durability of the gear. The regression analysis is also shown in the study.
Authors and Affiliations
Slavica Miladinović, Sandra Veličković, Milan Novaković
Keywords
Related Articles
- EP ID EP211738
- DOI -
- Views 144
- Downloads 0
ANALYSIS OF PROPERTIES OF THE FRP REBAR TO CONCRETE STRUCTURES
The application of the FRP (Fiber Reinforced Polymer) rebar is presented in this paper. The various kinds of fibers, depending on the types of the FRP rebar and types of matrix of FRP are listed. The main tasks of matrix...
INDUCING THE BIODEGRADABILITY OF POLYMERIC COMPOSITE MATERIALS USING BIORANFORTS
The purpose of the research is to obtain composite materials with high structural, thermo-mechanical and / or tribological performances, according to ecological norms and international requirements in order to replace th...
IMPACT TOUGHNESS OF HIGH-STRENGTH LOW-ALLOY STEEL WELDED JOINTS
Impact toughness of samples with three different relative positions of V-notch and multipass V- butt welded joint at high-strength low-alloy steel S690 are considered in this paper. The aim of this paper is to analyze th...
THE IMPACT OF VOLUME FRACTION METAL/CERAMIC CONSTITUENTS ON CRITICAL BUCKLING TEMPERATURE OF FUNCTIONALLY GRADED PLATE
A thermal buckling analysis of functionally graded rectangular plates is presented. Mechanical and thermal properties of the functionally graded material, except Poisson’s ratio, are assumed to vary continuously through...
ANALYSIS OF THE STATIC BEHAVIOR OF THE SHAFT BASED ON FINITE ELEMENT METHOD UNDER EFFECT OF DIFFERENT VARIANTS OF LOAD
By using the method of finite elements and starting with the possibilities given by the program system ANSYS in the field of application, research has been performed regarding the analysis of static behavior of a centrif...