Art Pieces Casting from Brass, Destined to Artificial Local Lightening, Used in Orthodox Cult
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2006, Vol 29, Issue 2
Abstract
In this paper are presented some realizations from SC RANCON SRL Iasi, which regards the casting of lighting local parts from brass, used in orthodox religion. Thus is highlighted the relationship between functionality, technical realization and artistic impression given by these objects from the perspective of the sacred service solemnity.
Authors and Affiliations
Ion CARCEA, Florin DIACONESCU, Cristian DIACONESCU
Keywords
Related Articles
- EP ID EP663529
- DOI -
- Views 71
- Downloads 0
Corrosion Behaviour of Tombac Used in Cult Objects Manufacturing
Corrosion of metals and metallic alloys is due to their thermodynamic instability in relation to their oxidation form. Corrosion tests performed in this work simulate the exposure conditions in different environments of...
ZnO Nanoparticles: Green Synthesis, Properties and Applications
In this paper, a review, there are presented “Green” routes used in the synthesis of ZnO nanoparticles because they are more eco-friendly alternatives in comparison with chemical and/or physical techniques. Microorganism...
Influence of Normal Loads on Corrosion Behaviour of Ti-6Al-4V Alloy during Fretting in Artificial Saliva
The fretting corrosion behaviour of untreated Ti-6Al-4V alloy in artificial saliva solution was evaluated based on the change in open circuit potential (OCP) measured as a function of time. Fretting corrosion experiments...
Researches Regarding the Elements Loss through Vaporization during the Elaboration Process in LD Converter
The paper presents a series of researches regarding the vaporization of the component elements of the metallic bath and slag during refining in LD converter. Also, the main factors which influence the vaporization proces...
Some Considerations on Environmental Sand Cores with Inorganic Binder
Traditionally, complex sand cores are produced using organic binders such as phenolic and furan resins. These binders can create bad smelling fumes requiring complex and expensive ventilation equipment to fulfill environ...