Automatic Speed Breaker on Time Demand Using Embedded Systems
Journal Title: International Journal of Electronics Communication and Computer Technology - Year 2012, Vol 2, Issue 6
Abstract
The concept of this research work is to have an automatic speed breaker on time demand according to the requirements. Means when there is no need of the speed breaker on the road, it disappears from the road and the road becomes flat and when there is a need then the breaker comes on the road from ground and it starts its working of slowing speed of the vehicles. In implementation of this concept, we use an iron made hemi-cylindrical speed breaker which is capable of rotating itself using control circuitry of embedded systems. So when needed, it comes on the road by rotating itself from flat position and when not needed, it rotates itself again and gets flat and combines with flat road. In the system, real time clock is used to mention the required time for having the speed breaker on road. When time gets started, breaker comes on the road and remains until the countdown gets zero. In the Embedded system’s clock any time and date can be stored on which the speed breaker is required on the road. So this type of speed breaker is useful before any building for which the time is specified for coming in the building and going out from it e.g. schools, any organization etc.
Authors and Affiliations
Sanchit Vashistha| M.Tech. Student, Department of ECE Gyan Vihar School of Engineering & Technology Suresh Gyan Vihar University Jaipur, Rajasthan, India, Rekha Agrawal| Asst. Prof., Department of ECE School of Engineering & Technology Suresh Gyan Vihar University Jaipur, Rajasthan, India
Keywords
Related Articles
- EP ID EP8312
- DOI -
- Views 447
- Downloads 38
An Error Notification Method for a High Speed Serial Communication on FPGA
In parallel communication the cost as well as complexity of the system increases due to simultaneous transmission of data bits on multiple wires. Serial communication alleviates this drawback and emerges as effective...
Dynamic Cluster Based Data Aggregation in WSN (FDDA)
WSN consisting of a large number of small sensors with low-power transceivers can be an effective tool for gathering data in a variety of environments. As sensor nodes are deployed in sensing field, they can help people...
Digitally Programmable Floating Impedance Multiplier using DVCC
A novel digitally programmable floating impedance multiplier is presented. It is realized using differential voltage current conveyor and a digital control module. Digitally programmable floating impedance multipliers...
Wireless Sensor Network for Industrial Process Controlling & Monitoring
There has been tremendous research and developments have been done in wireless networking and technology. Wireless sensor networks implementation on industrial process monitoring and controlling purpose is not new to...
Generating Different Mobility Scenarios in Ad Hoc Networks
The purpose of mobility models is to describe typical terminal movement so that the analysis for these purposes can be made. Thus, the movement pattern of users plays an important role in performance analysis of mobi...