Bending strength and deformability of multilayered glass plates with different types of glass
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2017, Vol 1, Issue 69
Abstract
The cohesion of steel and composite fittings with wood through epoxy adhesive has been investigated. Experimental samples of plankglued prisms were tested for the removal of glued fittings. After experimental research, the dependencies between the pulling load and the unscrewing end of the armature were loosened. The analysis of the test results during which the method of calculating the required length of the rod anchoring of the fittings through an epoxy adhesive in the wood, taking into account the stress in the fittings and the strength of the wood for cutting, was obtained. A sufficient convergence of theoretical calculations with experimental data is found, which allows to recommend the presented method of calculation for the design of reinforced wooden structures. For full use of the strength of the fiberglass and fiberbasalt fittings, it is necessary to use additional anchorages or increase the corrugation of the surface of the composite fittings and secure attachment of these ribs to the body of the fittings.
Authors and Affiliations
B. G. , Demchyna, M. I. , Surmai, A. B. , Peleh, Y. M. , Shydlovskyy
Keywords
Related Articles
- EP ID EP327322
- DOI -
- Views 102
- Downloads 0
Calculation of non-homogeneous anisotropic rectangular shells with arbitrary fixation on the contur
Methods of calculating the non-homogeneous anisotropic rectangular shells with arbitrary fixation on the contour is set out, which is reduced to a boundary value problem, the solution of which is associated with consider...
Influence of snow loading character on optimal lattice`s geometric shape of the combined arch system
In the article, the authors investigate the question of determining of the lattice made from flexible elements geometric share in a combined arch system proceeding from the condition of its operability and the minimum of...
Calculation of flat bottom tanks, as shells of rotating rigidity rotation
This article includes actions for definition internal forces and moments of thin-walled circular silo for the storage of particulate solids. Wall sheeting of tower silo loaded symmetrical loads. It is assumed, that norma...
Dry construction mixture modified with polimeric powders
Today, new construction, renovation or repair of buildings cannot be imagined without using dry mixes. However, having thoroughly studied technical literature and patent information extensive technology for manufacturing...
Effect of basalt fiber on the viability of sand concrete mixtures
The influence of the basalt fiber on the viability of the sand concrete mixture and its mobility on the reference cone depth penetration is investigated. All sandy concrete had a cement/sand ratio of 1/3. In all mixtures...