Braze welding of Dissimilar Materials
Journal Title: Biuletyn Instytutu Spawalnictwa - Year 2018, Vol 62, Issue 3
Abstract
The article presents issues related to the braze welding process, discusses primary methods applied in industry as well as indicates characteristic features of the process, discusses the structure of joints most commonly used in industry and advanced braze welding methods enabling the obtainment of joints satisfying strict quality requirements. In addition, the article assesses the possibility of using the braze welding technology when repairing casts made of various casting alloys, discusses application areas for braze welded joints of materials characterised by different mechanical and physicochemical properties as well as presents metallographic and mechanical test results concerning brazed welded joints made using a robotic CMT (Cold Metal Transfer) braze welding station.
Authors and Affiliations
Zbigniew Mirski, Tomasz Wojdat, Alicja Margielewska
Keywords
Related Articles
- EP ID EP381048
- DOI 10.17729/ebis.2018.3/2
- Views 70
- Downloads 0
Simulation Tests of the Welding Machine Secondary Circuit
The article discusses the analysis of circuit parameters and power losses in the secondary circuit of the welding machine. The analysis was based on FEM calculations performed using the ANSYS Mechanical APDL software pro...
Measurement System for the Monitoring of Laser + MAG Welding Parameters
This paper presents the design, technical possibilities and the intended use of a multi-station measurement system for HLAW process monitoring. The system used at the production site allows the monitoring and recording o...
Numerical Analyses in the Modelling of Spot Resistance Welding Processes
The article presents the basics of the modelling of spot resistance welding processes, describes mechanisms to be taken into consideration in relation to numerical analyses of the above-named processes, briefly describes...
Analysis of Low-Amplitude Indications in Ultrasonic Tests of Thick-Walled MAG-Welded Butt Joints
The article presents an attempt at the clarification of low-amplitude indications, i.e. below the level of assessment, frequently detected in ultrasonic tests of welded joints. The above-named indications, non-evaluable...
Structure and Properties of Nickel Alloy Overlay Welds Plasma Cladded on Creep-Resistant Steel Tubes
The article presents tests aimed to develop technological parameters of the plasma surfacing of Inconel 625 overlay welds onto boiler tubes (φ 45 × 5 mm) made of steel 13CrMo4-5, providing the content of iron on the over...