Carbon Monoxide Monitoring System Based On Arduino-GSM for Environmental Monitoring Application

Abstract

In recent years with tremendous progress in technology and growth in demand for vehicles, an individual fizzle to look after awful factors that occur due to improper maintenance of vehicles results in increase in air pollution and which results in disturbing environmental condition all over the world, that tends to raise global warming. In this paper “Carbon Monoxide Monitoring System Based on Arduino-GSM for Environmental Monitoring Application” is a system which detects the Carbon Monoxide (CO) gas coming out of a vehicle which is displayed on vehicle itself, so when the level of CO increases alerts will be sent to the owner of vehicle regarding maintenance of vehicle and if action is not taken regarding CO the vehicle is made to stop and later allowed to start the vehicle after given period. This cycle is continued to keep the CO free environment and also reduce human efforts to monitor each and every vehicle. The repetitively breaking down of a vehicle causes the owner to take serious action for reducing the CO of his vehicle. Index Terms: Carbon Monoxide, sensor module, Arduino & GSM module.

Authors and Affiliations

Ms. Nishigandha Kaneri, Ms. Kajal Bhalekar, Ms. Sajari Kharvatkar

Keywords

.

Related Articles

Measuring the Thermal Conductivities of Low Heat Conducting Disk Samples by Monitoring the Heat Flow

This article aims to establish an experimental procedure to measure heat transmission coefficients in low heat conductive materials. The newly developed model takes as starting point the application of Fourier’s law to a...

Development of Automotive Technology Instrument Using Rasch Analysis

This study aims to test the validity and reliability of Automotive Technology Instrument using Rasch analysis. The objective of this study is to measure the instrument with the tests in Rasch's analysis such as fit items...

Effect of Deposition Temperature on the Physical Properties of Ag-Cu2O Thin Films by D C Magnetron Sputtering

We report co-deposited Ag-Cu2O films using DC Magnetron Sputtering method on glass substrates. Both Ag content and temperature were varied during deposition. UV-VIS-NIR, Hall measurements were used to characterize the op...

The Effect of Curing Period on Strength Behaviour of Sand Bentonite Mixes

A landfill is a secured engineered pit in the ground into which the wastes are dumped. Proper landfill liners need to be used to avoid any hydraulic connections between waste and surrounding environment. These liners can...

Analysis of The Propulsion System Towards The Speed Reduction of Vessels Type PC-43

(PC-43) is an Indonesian navy vessel type limited patrol craft made in Indonesian. The vessel was designed using a steel material with a maximum speed of 27 knots and using engine power by 3 x 1800 HP, T = 1.40 at the em...

Download PDF file
  • EP ID EP391160
  • DOI 10.9790/9622-0705025761.
  • Views 129
  • Downloads 0

How To Cite

Ms. Nishigandha Kaneri, Ms. Kajal Bhalekar, Ms. Sajari Kharvatkar (2017). Carbon Monoxide Monitoring System Based On Arduino-GSM for Environmental Monitoring Application. International Journal of engineering Research and Applications, 7(5), 57-61. https://www.europub.co.uk/articles/-A-391160