Control System for Producing Electricity with Dual Stator Winding Cage-Rotor Induction Generator
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2014, Vol 21, Issue 2
Abstract
This paper will present the key design equations and control design model of the Dual Stator Winding Cage-Rotor Induction Generator (DSWIG) to achieve wide-speed-range operation with reduced capacity of the static power controller for low power wind or hydro applications. The proposed induction generator consists of a standard squirrel-cage rotor and a stator with two separate windings wound for a similar number of poles. Moreover, the system control strategy using the stator flux orientation is consequently proposed. The aim of the paper is to emphasize that the low speed induction generators with power electronic converters represent a realistic and useful solution for direct drive power applications.
Authors and Affiliations
Lucian Nicolae Tutelea, Sorin Ioan Deaconu, Gabriel Nicolae Popa
Keywords
Related Articles
- EP ID EP460909
- DOI -
- Views 91
- Downloads 0
Rotor Pole Pitch Factor Influence on the Operation Parameters of a 9/10 Pole Permanent Magnet Synchronous Machine
The present paper is aimed to determine the pole pitch factor influence on the operating parameters for the considered structure. Transient analysis is used to obtain the results for each of the studied pole pitch factor...
The Hermetic Synchronous Engines for Pumping the Aggressive Liquids
The paper covers brief information about asynchronous and synchronous engines used for driving centrifugal pumps. It is argued the fact that asynchronous engines do not, actually, satisfy the requirements for hermetic en...
Tests Regarding the Transitory Regimes of Putting off Load of the Hydroagregate
For high power and high revolution aggregates it is required that the operation should take place in safe conditions, for all the running regimes. The most difficult regimes for a hydro aggregate are the transitory regim...
Study of the Magnetic Field of a Permanent Magnet Synchronous Generator by using the Finite Element Method
The study shows the numerical simulation of the magnetic field for a permanent magnet synchronous generator prototype. Through the study, the OPERA software environment, a program based on the numerical computation using...
Development and Evaluation of Charcoal-Powered Bread Baking Oven
Charcoal-powered bread baking oven was developed and evaluated with functional efficiencies of 91.2% and 92.1% for baking dough of mass 0.5kg and 1.5 kg to bread at BP of 27.7minutes, 35.9 minutes with the baking tempera...