Cylindrical control of holes of tube details manufactured by deforming broaching
Journal Title: Український журнал із машинобудування і матеріалознавства - Year 2018, Vol 4, Issue 2
Abstract
This work is devoted to the issues of processing holes in different thickness of tubular billets great length deforming broaching. The urgency of this problem is substantiated. The results of studying the regularities of deformation of a material in the deformation zone under deforming broaching are presented. The reasons for the formation of this type of geometric error as the curvature of the axis of the machined hole are established. They are caused by the variation of axial deformations of the sections of blanks of various thickness in the circumferential direction. An analytical-experimental model for determining the curvature of the axis of processed products is given. The factors influencing this kind of error are systematized. The main structural factors of the deforming broach are identified, which can influence this kind of error. Experimental studies were carried out to optimize the design parameters of the instrument. An experimental mathematical model is developed to determine the influence of the main constructive factors of the instrument on the change of this type of error. The conditions for minimizing the curvature of the axis of the machined hole are established. The influence of the conditions of basing the workpiece on the curvature of its axis is determined. The recommendations on the design of deforming broaches have been developed, which make it possible to ensure the alignment of the workpiece and the tool. New designs of deforming broaches have been developed, which make it possible to control the cylindricality of the treated deep holes. The results of experimental verification of the deforming broach designs developed during the processing of a pilot batch of various thickness blanks are presented.
Authors and Affiliations
Yakov Nemyrovskyi, Eduard Posvyatenko, Sergey Sheikin, Yuriy Tsekhanov
Keywords
Related Articles
- EP ID EP499308
- DOI -
- Views 121
- Downloads 0
Dynamic Properties Predictions for Laminated Plates by High Order Theories
The main aim of this study is to predict the elastic and damping properties of composite laminated plates. Some approximate methods for the stress state predictions for laminated plates are presented. For simple uniform...
Substantiation of Parameters and Analysis of Operational Characteristics of Oscillating Systems of Vibratory Finishing Machines
The calculation diagrams of oscillating systems and operation features of vibratory finishing machines are considered. The mathematical models of three-mass and four-mass oscillating systems are presented. The amplitude...
Cutter Force and Influence of Elastic Deformation of Technological System of Gear-Hobbing Machine on Precision of Radial-Circumferential Method of Gear Cutting
The relevance of the problem which is solved in this article has been substantiated. In modern machines and equipment, rotary motions which cannot be implemented without gear wheels and gear trains are always present. At...
Development of Welding Consumables for Wet Underwater Welding of High-Alloy Corrosion-resistant Steel
This paper discusses a technology of mechanized wet underwater welding of high-alloy corrosion-resistance steel. The main aim of the investigation is development of self-shielded flux-cored wire for wet underwater weldin...
Research of Influence of Oscillations of Tool-Part System on Roughness of Surface Layer during High-Speed Friction Strengthening
During the discontinued friction strengthening except of the high-speed friction the processes of high-frequency shock loadings appears in the tool-part contact zone. The vibrations occur in the machine elastic system. D...