DATA ACQUISITION MADE WITH MICROCONTROLLER ON THE 1-WIRE LINE
Journal Title: Вимірювальна техніка та метрологія - Year 2007, Vol 1, Issue 68
Abstract
Our research aimed at exploring the possibility of the communication between the microcontroller and the 1-Wire device. After receiving communication data transfer, we were to acquire data from numerous 1-Wire devices, such as identification devices, temperature, humidity or other sensors, EEPROM Memory devices etc. Transferring data (and power) through the single line would be much more convenient, providing, that the transfer will be reliable and accurate. In our study we used original testing board with the Microchip PIC 16F628 microcontroller. We also made use of the HP 16 500 A logic analyzer for controlling the waveforms on the 1-Wire bus. The logic analyzer appeared invaluable in testing time waves. 1-Wire devices, made by Maxim/Dallas, have the rich technical documentation. On the base of their Application Note 2420 we prepared an assembler program for the reading the 8-bytes long identification number from the iButton DS1990R. However, obtaining the positive result in performing the communication on the 1-Wire bus appeared to be very hard. In our research we tried to employ as well the intermediate device, namely DS2480B Line Driver. Its role was to relieve the host microcontroller of generating the communication waveforms. It simply took over the role of the host. Also we used the UART channel of the PIC microcontroller. All our efforts, however, remained without any positive result. Then we decided to come back and to connect the iButton to one of free lines on the I/O port of the PIC 16F628 microcontroller. Our choice was line 1 of PORT A, while most of the PORT B lines were dedicated to communicate with the LCD 2x16 display. Positive communication results we achieved, when we adjusted manually the communication parameters, while simultaneously testing on the logic analyzer the resulting waveforms.
Authors and Affiliations
Barbara Borowik, Bohdan E. Borowik
Keywords
Related Articles
- EP ID EP203803
- DOI -
- Views 73
- Downloads 0
ОПТИМАЛЬНА ОБРОБКА ЕЛЕКТРОЕТИНОСИГНАЛУ ДЛЯ ВИЗНАЧЕННЯ ФОРМИ ЕЛЕКТРОРЕТИНОГРАМИ
On the base of the linear stochastic discreet process as a mathematics model of an electroretinosignal a digital electroretinosignal processing method for ophtalmodiagnastic estimation of the electroretinogram has bee...
ЗАВАДОСТІЙКИЙ СИГНАЛЬНИЙ ПЕРЕТВОРЮВАЧ НА БАЗІ СИНХРОННОГО ДЕТЕКТОРА
The work considers design principles of signal transducers based on the synchronized detector which have high noise-immunity and meet requirements of modern low-voltage electronics. There are presented the principle of o...
ЕЛЕМЕНТИ МЕТОДОЛОГІЇ ВИМІРЮВАННЯ ГІДРОХІМІЧНИХ ХАРАКТЕРИСТИК ВОДНИХ ЕКОСИСТЕМ
Recommendations concerning measurement of hydrochemical characteristics in lakes of biological Shatsk reserve on the basis of a series of international standards ISO 14000, ISO/IEC 17025 in view of mathematical model of...
DATA ACQUISITION MADE WITH MICROCONTROLLER ON THE 1-WIRE LINE
Our research aimed at exploring the possibility of the communication between the microcontroller and the 1-Wire device. After receiving communication data transfer, we were to acquire data from numerous 1-Wire devices, s...
КОНТРОЛЬ ЯКОСТІ ПИТНОЇ ВОДИ ЗА ЕЛЕКТРИЧНИМИ ПАРАМЕТРАМИ
In the article it is investigated the method of quality control of drinking water on the electrical parameters with the use of two electrode electrolytic cell. Is carried out the analysis of equivalent circuit and the er...