Defining a criteria for the identification of a technique for producing tomato juice
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 3, Issue 11
Abstract
<p>The basis of modern analysis of the quality of juice products is a matrix approach. The essence of the matrix approach is to define a series of parameters, which comprehensively characterize the composition of juices. In this regard, it is important to study the content of individual biologically active components in addition to general quality parameters in evaluation of juices. The content of individual biologically active components depends on the origin of raw materials and technology of processing.</p><p>Analysis of the chemical composition of tomatoes showed that carotenoids are characteristic nutrients inherent to this particular kind of vegetables. In this regard, we propose the content of β-carotene as the most acceptable criterion for identification.</p><p>We studied quality of tomato juices by organoleptic and physical-and-chemical parameters (soluble solids content, total acidity, mass fraction of pulp and β-carotene content) in order to confirm a method of production of tomato juices, namely, the method of recovery or direct pressing.</p><p>The profile analysis showed that the most positive parameters were in the juices of «EosBio» TM and «Galicia» TM, which makes us assert that their production technique was direct pressing. We established that the mass fraction of soluble solids, titratable acids and pulp met the requirements in all samples. The largest mass fraction of pulp was in the juices of «Galicia» TM – 30.80 and «EosBio» TM – 24.23. This data confirms that the method of production of these juices was direct pressing.</p>We established that the content of β-carotene in the juices of «Sandora» TM, «Rich» TM and «Sadochok» TM produced by the method of recovery was in the range of 0.24–0.32 mg/100 g. At the same time, these values were significantly higher in the juices of «Galicia» TM and «EosBio» TM produced by the method of direct pressing, they were 0.589 and 0.591 mg/100 g, respectively. Thus, we confirmed the assumption about the connection between a production method and the content of β-carotene in tomato juices. We proposed using this parameter as a marker criterion for the identification of a technique for producing tomato juices
Authors and Affiliations
Oleksandra Babii, Tetiiana Bozhko, Svitlana Vezhlivtseva, Raisa Donchevska, Olena Moroz, Nataliia Vdovenko, Tetana Denysenko, Valentyna Kepko
Keywords
Related Articles
- EP ID EP666492
- DOI 10.15587/1729-4061.2019.166593
- Views 272
- Downloads 0
Development of procedure for assessing the degree of enviromental hazard from the sources of aquatic environment pollution
<p>The new procedure for evaluation of the degree of environmental safety of water sites based on the comparison of the influence of separate point sources of sewage discharge was developed. The use of this procedure wil...
Development of the linguometric method for automatic identification of the author of text content based on statistical analysis of language diversity coefficients
<p>We have developed the linguometric method for algorithmic support of content monitoring processes to solve the problem of the automatic identification of the author of the Ukrainian text content based on the technolog...
Acrylic acid synthesis by oxidative condensation of methanol and acetic acid on B–P–V–W–Ox/SiO2 catalyst
The process of oxidative condensation of methanol with acetic acid to acrylic acid on B–P–V–W–Ox/SiO<sub>2</sub> catalyst modified by hydrothermal method has been studied. Modification of the catalyst by hydrothermal tre...
Improvement of a rotor film device for the production of highquality multicomponent natural pastes
<p>We have improved a heat exchange system of the rotor film device by using, as a heater, a flexible film resistive electric heater of the radiation type, which repeats the geometry of a working chamber of the device. I...
Application of piecewisecubic functions for constructing a Bezier type curve of C1 smoothness
<p class="a">We have proposed and implemented a new method for constructing a spline curve of third degree, which possesses the properties of both a cubic spline and the Bezier curve. Similar to building the Bezier curve...