DESIGN AND ANALYSIS OF A LOW FRICTION TANTALUM POWDER FORMING MOULD UTILIZING MULTI-WAVELENGTH EXCITING MODE

Journal Title: Topics in Chemical & Material Engineering (TCME) - Year 2018, Vol 1, Issue 1

Abstract

Tantalum capacitor has been widely used in many fields of electrical, communications, automotive, military, aerospace, etc. This paper proposes a low frictional mould of tantalum capacitor, and the ultrasonic friction reduction is realized by an ultrasonic transducer driven by twelve rectangular piezoelectric plates. The forming pressing mould mainly contains top convex mould, top adjusting shim, ultrasonic transducer, bottom convex mould, and bottom adjusting shim. The rectangular piezoelectric plates are bonded to the opposite outside surfaces of ultrasonic transducer and the d31 working mode is adopted. The composite exciting method of the forming pressing mould is clarified in detail. The modal shape of the ultrasonic transducer is analyzed using Finite Element Method (FEM). The prototype is fabricated and tested. The testing results indicate that the vibration performance of the motor is in good agreement with the simulation results.

Authors and Affiliations

Yikang Li, Mengfei Yin, Qi Gao, Tinghai Cheng, Zhihua Wang, Dayi Zhang

Keywords

Related Articles

DESIGN AND ANALYSIS OF A LOW FRICTION TANTALUM POWDER FORMING MOULD UTILIZING MULTI-WAVELENGTH EXCITING MODE

Tantalum capacitor has been widely used in many fields of electrical, communications, automotive, military, aerospace, etc. This paper proposes a low frictional mould of tantalum capacitor, and the ultrasonic friction re...

ELECTROCHROMIC PROPERTIES OF MULTILAYER FILM BASED ON POLYOXOMETALATE AND CDS NANOPARTICLES

The electrochromic films of PEI/[P5W30/PEI]20 and PEI/[P5W30/CdS]20 were composed of the polyethyleneimine (PEI), polyoxometalate cluster K12.5Na1.5[NaP5W30O110]· 15H2O (P5W30) and cadmium sulfide (CdS) nanoparticles. Th...

A NEW NICKEL COORDINATION POLYMER CONSTRUCTED FROM 4-[(8-HYDROX -Y 5-QUINOLINYL) AZO]-BENZENESULFONIC ACID: SYNTHESIS, STRUCTURE AND PROPERTY

One new supramolecular compound based on H2L (H2L = 4-[(8-hydroxy-5-quinolinyl) azo]-benzenesulfonic acid), {[NiL(en)]• DMF}n (1) (en = ethylenediamine, DMF = N,N-dimethylformamide), has been synthesized by solvothermal...

ELECTROCHROMIC NANOCOMPOSITE FILM BASED ON MONOLACUNARY DAWSON-TYPE POLYOXOMETALATE AND TIO2 NANOWIRES

Electrochromic (EC) nanocomposite films consisting of monolacunary Dawson-type polyoxometalates (POMs) K10P2W17O61 (P2W17) and TiO2 nanowires (TiO2 NW) were fabricated by combining hydrothermal and sol-gel spin coating a...

RESEARCH AND APPLICATION OF INTERNET PUBLIC OPINION INFORMATION RETRIEVAL METHOD

This article briefly analyzes the structural system of the Internet public opinion system, and briefly introduces and analyzes the information retrieval technology and the Internet public opinion information retrieval te...

Download PDF file
  • EP ID EP414862
  • DOI 10.26480/icnmim.01.2018.394.397
  • Views 69
  • Downloads 0

How To Cite

Yikang Li, Mengfei Yin, Qi Gao, Tinghai Cheng, Zhihua Wang, Dayi Zhang (2018). DESIGN AND ANALYSIS OF A LOW FRICTION TANTALUM POWDER FORMING MOULD UTILIZING MULTI-WAVELENGTH EXCITING MODE. Topics in Chemical & Material Engineering (TCME), 1(1), 394-397. https://www.europub.co.uk/articles/-A-414862