Design of a Centrifugal Blower for a 400kg Rotary Furnace.
Journal Title: American journal of Engineering Research - Year 2016, Vol 5, Issue 10
Abstract
Poor performance of a rotary furnace cannot be unconnected to failure in the design of the blower among others, This paper discuss the design of a centrifugal blower for a rotary furnace which will give the required manometric efficiency that will aid adequate combustion as required. The blower was designed to convert ‘driver’ energy to kinetic energy in the fluid by accelerating it to the outer rim of the revolving device known as the impeller. The impeller, driven by the blower shaft adds the velocity component to the fluid by centrifugally casting the fluid away from the impeller vane tips. The amount of energy given to the fluid corresponds to the velocity at the edge or vane tip of the impeller. Significance: Centrifugal blowers are applicable in furnaces such as Rotary and cupola furnace, the efficiency of these furnaces depend on the blast rate and air delivery from a well design blower. This paper will guide to achieve this aims.
Authors and Affiliations
Sani Malami Suleiman,, Kantiok Obadiah, . , Lawal Ibrahim Atiku
Keywords
Related Articles
- EP ID EP404513
- DOI -
- Views 93
- Downloads 0
Smart Autonomous Camera Tracking System Using myRIO With LabVIEW
Tracking in real time is one of the major issue or task which can be performed for variety of purposes like in surveillance for monitoring any kind of dynamic scenes for safety purposes. So here in the proposed system a...
Prospects of Implementing E-Learning Systems based on Learning Objects and XML in Nigeria’s Educational Sector
This paper started with highlighting the forms of e-learning and pointing out the key difference between Synchronous and Asynchronous e-learning. It described the popular e-learning systems that gained ground and recogni...
Thermodynamics of adsorption/desorption of cellulases NS 50013 on /from Avicel PH 101 and Protobind 1000
Insight from thermodynamic parameters of enthalpy (ΔH), entropy (ΔS) and Gibbs free energy (ΔG) was used to predict conditions for desorption of cellulases from wheat straw. The analogues of the cellulose and lignin comp...
CV Joint Rubber Boot Condition, the Secret to the Life Span of Front-Wheel-Drive Cars’ Drive Shafts
‘Information is Power’ leads to the desire to produce this paper which tells us a lot on the secret to the safe working condition of the Drive shafts of Front-wheel-drive cars. The paper first introduced by little explan...
An Object-Oriented Approach for Optimizing Query Processing In Distributed Database System
Query processing in distributed databases involves the transfer of query from one site to another. As a result of this complexity, additional storage space and time may be needed, which could result in cost overhead sinc...