Design of Alternating Current Charging Spot Control System for Electric Vehicle
Journal Title: 河南科技大学学报(自然科学版) - Year 2016, Vol 37, Issue 3
Abstract
By analyzing the system structure and working principles of alternative current( AC) charging spot,the control system of AC charging spot for electric vehicle was designed based on STM32 processor. The basic functions and charging process states of AC charging interface were elaborated. The design of control pilot circuit and charing state acquisition circuit was completed. The pulse width modulation( PWM) module and the analog to digital converter( ADC) module were set by the software. The functions of charging process control pilot,connection confirmation,identification of the maximum current of charging interface,and the real-time acquisition of charging connection state were realized. The test results indicate that the system has good stability.
Authors and Affiliations
Kun XU, Ziang ZHOU, Dingyun WU, Wenbo GENG, Xiangdong LI
Effect of Cold Rolling on Interfacial Microstructure and Properties of Ti-Al Roll-casted Composite Plate
The Ti-Al composite plate was prepared by cast-rolling method and cold rolling. Mechanical properties of different deformations of composite plate were detected by universal testing machine. The microhardness near the in...
Analysis and Improvement of Axial Vibration in Battery Cooling Fan for New Energy Vehicle
In order to solve the problem of large axial vibration in battery cooling fan for new energy vehicle froma Fuzhou company, the technology of vibration reduction for cooling fan systems was studied. Affecting factors of t...
Study on Anti-Winding Performance of Tangential Flow Cylinder for Long and Thin Tenacious Haulm
For the problem that threshing cylinder was winded by oat stem during threshing process, a new type of tangential flow cylinder test bed was designed under the premise of guaranteeing threshing capacity of threshing cyli...
Modeling and Optimization of Non-ideal Litz Wire in Wireless Power Transfer System
In order to reduce the high-frequency losses of the Litz wire, finite element simulation combined with experimental methods were used to design different shapes of Litz wire joints. The distribution of the strands on the...
Motor Control of Pure Electric Vehicle Based on BP Fuzzy Neural Network Control
A proportional integral( PI) controller was designed based on back propagation( BP) fuzzy neural network to solve the problem that traditional PI control could not reach good control effect of the motor. Driver operation...