Design of Conical Strainer and Analysis Using FEA
Journal Title: International Journal of Engineering and Science Invention - Year 2018, Vol 7, Issue 2
Abstract
Strainer is a Mechanical element, which is used to separate the debris particles from the flowing fluid to downstream equipment. The fluid flow without filtration in to the downstream equipment causes damage, due to the initial and maintenance cost of downstream equipment is high, it is necessary to avoid the equipment from the failure. Generally the design, maintenance and service are done by keeping the cost as its main factor. Hence the possible methods should be adopted to avoid this type of failure. The Temporary Strainer is used when the debris rate is more in fluid flow. The pressure exerted into the normal temporary strainer could not withstand the fluid flow exerted to the downstream process and collect the debris properly. Hence Conical strainer is the type of Temporary strainer proposed for large debris collection capacity. So design is carried out to make more stiffer to collect large rate of debris and withstand more pressure with less deformation. Finally validated the results of FEA solution with the Theoretical solution. From the derived formulae, the deformation is more than the expected level, obtained better result for conical Strainer with Stiffener.
Authors and Affiliations
M. Umashankar, G. S. Santhosh
Keywords
Related Articles
- EP ID EP396397
- DOI -
- Views 96
- Downloads 0
Optimization of Process Parameters in Abrasive Jet Drilling Of Hastelloy Using Taguchi Method
Machining of nickel base Hastelloys is considered as moderate to difficult. During machining, these alloys work harden rapidly, generate high heat during cutting, weld to the cutting tool surface and offer high resistanc...
A Modified Halpin-Tsai Model for Estimating the Modulus of Natural Fiber Reinforced Composites
The modulus of composites formed from three selected natural fiber sources (Empty Plantain Bunch Fiber, Empty Palm Bunch Fiber and Rattan Palm Fiber) - mercerized at optimum conditions - with two selected thermosetting r...
A study of on-site material management handling practices & rating of the different construction sites in Ahmadabad city.
This paper is written to show the issue in material management system in construction projects as there is approximately 60% of the capital cost in construction project consist of Material cost. Therefore, it is essentia...
Review of aluminium composites and their tribological and mechanical properties
Aluminium metal matrix composites (MMC’s) play a crucial role in various fields like automobile, aerospace, military, aircrafts, sheet metal, construction etc. due to unique combination of their properties. The propertie...
Present Status of Insecticides Use for The Cultivation of Brinjal in Kushtia Region, Bangladesh
This study has been carried out to assess the present status of insecticides use for the cultivation of brinjal in Kushtia region. A total number of 240 brinjal growers were randomly selected and interviewed by structure...