Designing a system of liquid cooling for industrial microwave installations
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 4, Issue 5
Abstract
The paper considers the issue on ensuring a thermal regime of the magnetron's anode unit by replacing an air-cooling system with the system of liquid cooling. It has been argued that a liquid cooling system is most suitable for magnetrons, for which currently an air-cooling system is implied, although they are not designed for a continuous operation in the structure of industrial microwave installations. Arranging the system of liquid cooling would makes it possible for a magnetron to work over long time without overheating and under favorable conditions, which rule out a possibility to clog the heat exchange surface with particles and dust, as well as the occurrence of overheating of the anode unit's surface. The basic element of the proposed system for liquid cooling is a cooling jacket, which represents an annular channel made from a heat-conducting material. Cooling jacket is mounted directly on the anode unit; in this case, a compression ratio of surfaces and the thickness of an air gap must ensure a minimum total thermal resistance. In order to determine heat transfer coefficients, an empirical dependence was established, which reflects the fact that when cooling the anode units the rational regimes are the viscous and transitional motion modes. The basic thermal characteristics of the cooling process have been defined, which include a coefficient of heat transfer, change in a heat-carrier temperature, the maximally permissible temperature at inlet. Calculations were carried out for two types of heat-carriers: water and a 54 % aqueous solution of ethylene glycol. A circuit for the system of liquid cooling has been proposed, which implies cooling from 1 to 6 magnetrons. Applying a given circuitry and choosing the rational estimated modes make it possible to solve the task on improving production efficiency, as well as reliability of microwave equipment.
Authors and Affiliations
Irina Boshkova, Alexandr Titlov, Natalya Volgusheva, Natalia Kolesnychenko, Tetiana Sagala
Keywords
Related Articles
- EP ID EP666847
- DOI 10.15587/1729-4061.2019.175470
- Views 70
- Downloads 0
Method for determining the thickness of a binder layer at its non-uniform mass transfer inside the channel of a honeycomb filler made from polymeric paper
Sandwich panels with honeycomb filler based on polymer paper "Nomex" is widely used in crucial structures for various purposes. In the process of manufacturing such panels, some factors of the technological process, such...
Improving the quality of forgings based on upsetting the workpieces with concave facets
<p>We propose a forging method for forgings, which implies the upsetting of workpieces with concave facets. A procedure for the theoretical research has been devised aimed at studying the mechanism of closure of artifici...
Development of test operations with different duration in order to improve verification quality of effectiveness formula
<p>Selection of an indicator for assessment of effectiveness of operations is a very essential step, because this choice predetermines the mode of operation for all functional systems at an enterprise.</p><p>An axiom is...
Traffic engineering in a software-defined network based on the decision-making method
<p>One of the main control tasks in a computer network is to organize an effective system of information delivery; this task is of particular relevance in the software defined network. Conventional routing tools do not m...
Development of a method for optimization calculation of a group of sound-insulating panels for airborn noise protection
<p>Various designs and procedures for calculating soundproof panels for protecting premises against airborne noise were considered. These procedures make it possible to calculate single-layer, two-layer and three-layer p...