Detection Capability and CFAR Loss Under Fluctuating Targets of Different Swerling Model for Various Gamma Parameters in RADAR
Journal Title: International Journal of Advanced Computer Science & Applications - Year 2018, Vol 9, Issue 2
Abstract
Target detection of RADAR deals with different and manifold problems over few decades. The detection capability is one of the most significant factors in RADAR system. The main aim of detection is to increase probability of detection while decreasing rate of false alarm. The threshold of detection is modified as a function of the receiver noise level to keep a fixed rate of false alarm. Constant False Alarm Rate (CFAR) processors are used to maintain the amount of false alarm under supervision in a diverse background of interference. In Signal to Noise Ratio (SNR) level, a loss can be occurred due to CFAR processor. Gamma function is used to determine the probability of false alarm. It is assumed in adaptive CFAR that the interference distribution is familiar here. This type of CFAR also approximates the unknown parameters connected with various interference distributions. CFAR loss depends on gamma function. Incomplete gamma function plays an important role in maintaining threshold voltage as well as probability of detection. Changing the value of gamma function can improve the probability of detection for various Swerling Models which are proposed here. This paper has also proposed a technique to compare various losses due to CFAR in terms of different gamma function in presence of different number of pulses for four Swerling Models.
Authors and Affiliations
Md. Maynul Islam, Mohammed Hossam-E-Haider
Keywords
Related Articles
- EP ID EP275670
- DOI 10.14569/IJACSA.2018.090214
- Views 122
- Downloads 0
Low Error Floor Concatenated LDPC for MIMO Systems
Multiple-Input and Multiple-Output, or MIMO is the use of multiple antennas at both the transmitter and receiver to improve communication performance. MIMO technology has attracted attention in wireless communications; b...
The Identification of Randles Impedance Model Parameters of a PEM Fuel Cell by the Least Square Method
One of the problems of industrial development of fuel cells is the reliability of their performances with time. The solution of this problem is through by the development of improved diagnostic methods such as the identi...
A Zone Classification Approach for Arabic Documents using Hybrid Features
Zone segmentation and classification is an important step in document layout analysis. It decomposes a given scanned document into zones. Zones need to be classified into text and non-text, so that only text zones are pr...
Associative Classification using Automata with Structure based Merging
Associative Classification, a combination of two important and different fields (classification and association rule mining), aims at building accurate and interpretable classifiers by means of association rules. The pro...
Fingerprint Gender Classification using Univariate Decision Tree (J48)
Data mining is the process of analyzing data from a different category. This data provide information and data mining will extracts a new knowledge from it and a new useful information is created. Decision tree learning...