Detection of Warp Elongation in Satin Woven Cotton Fabrics Using Image Processing
Journal Title: Fibres and Textiles in Eastern Europe - Year 2016, Vol 24, Issue 4
Abstract
In this study, warp elongations in a satin fabric were detected using image processing to reduce yarn breakage during weaving. It was aimed to increase the productivity of the weaving looms. In this work, a high sensitive camera was used for the analyses. The warp elongation was analysed and determined statistically using MATLAB software. The warp elongations in satin woven fabric samples were examined and detected on a working loom using a high sensitivity camera. Additionally the strains for each warp yarn were measured and recorded. Different elongations for warp ends were observed, attributed to the differences in mechanism settings. The difference in the elongation of the warp yarns causes warp yarn breakages, which decrease productivity during weaving. This warp breaking ratio could be reduced by making necessary adjustments to the shedding mechanism on the loom.
Authors and Affiliations
Volkan Kaplan, Nilüfer Varan, Mehmet Dayik, Yıldıray Turhan, Güngör Durur
Keywords
Related Articles
- EP ID EP148757
- DOI 10.5604/12303666.1183202
- Views 97
- Downloads 0
Comparative Analysis of the Bursting Strength of Knitted Sandwich Fabrics
This study presents the mechanical properties of weft knitted sandwich fabrics (bursting strength) and the effect of the raw materials used. Two types of fabrics, with and without reinforcing yarns, were analysed. To det...
The Effect of Processing Conditions on the Performance of UHMWPE-Fibre Reinforced Polymer Matrix Composites
The aim of this study was to analyse the influence of the main pressing parameter, i.e. temperature of a ultra-high molecular weight polyethylene (UHMWPE) fibrous sheet Dyneema ® HB26, on the performance of resultant UHM...
Aktywność przeciwgrzybowa papierów modyfikowanych cieczami jonowymi
Papier jest materiałem, który bardzo łatwo ulega procesom biodegradacji. Najaktywniejszą grupę drobnoustrojów, które odpowiadają za te procesy stanowią grzyby strzępkowe. W celu zapobiegania tym niekorzystnym oddziaływan...
Textile Cover Effect on Aerodynamic Characteristics of a Paraglider Wing
Defined herein are the two PA-fabrics covering a paraglider wing, with the comparative object being permeable clothing material. The material parameters of textiles are applied in numerical simulations of aerodynamic cha...
Surface Characterization of Low Temperature Plasma-Induced Cashmere Fibre by Air Gas
Low temperature plasma (LTP) processing technology was successfully applied to modify cashmere fibres and three kinds of assemblies were formed, i.e., weak-treated, optimised -treated and severe-treated ones. Treatment p...