Determination of Head Load and Power Requirement for Development of BIN Type Paddy Dryer

Abstract

Harvested paddy grain with high moisture content must be dried to about 12 per cent (w. b) within 24 hours for safe storage and milling. The amount moisture evaporated from paddy was 86.64 kg. batch-1 of 500 kg paddy dried from moisture content of from 25 % (w. b) to 12 % (w. b). The bulk density of paddy was determined 609 kg. m-3 at 25.0 % (w. b) moisture content Heat transfer from the paddy was calculated 2.26 MJ kg –1 as bottom layer and top layer grain temperature 600C and 300C respectively. Total heat was calculated 250 MJ for a period of 8 hours paddy drying. Height of the air column was calculated 247.0 m for pressure drop of 63.17 cm of water. The pPower requirement for blower calculated as 3.0 Hhp for 500 kg paddy bin drying. Based on the design calculation 500 kg capacity paddy dryer was developed.

Authors and Affiliations

SWAMY R, SIVALA K, SMITH D, SADASIVARAO K, LAKSHIMIPATHY R

Keywords

Related Articles

ARIMA Forecast of Area, Production and Productivity of Rice in Amalgamated Raipur Using R

The forecast of the production of rice over future time series in Chhattisgarh has always been a matter of concern to the planners of the State, especially being a predominantly tribal region. The present study aims at p...

Standardisation of Suitable Super Absorbent Polymer Coating for Enhancing Seed Quality of Green Gram (Vigna Radiata L.)

Changing climatic conditions accompanied with unpredictable rainfall leads to decreased available water to plants thus creating the drought conditions, which reflects on the yield of quality seeds. Hence, suitable techno...

Effect of Organic-Cum-Inorganic Sources of Nutrients on Growth, Yield and Economical Gain from Guava

A field experiment find out result during 2015 and 2016 to study the organic-cum-inorganic sources of nutrient management (INM) on growth, yield and economical gain from 6 years old guava trees. Application of 100% NPK w...

Process Optimization and Characterization of Cereal Based Ready-to-Eat Extruded Snack Food

The cereal based Ready-To-Eat (RTE) snack, was prepared with blends of various flours including rice, corn, oats, barley and foxtail millet, using a twin screw extruder. Various trials were conducted with different propo...

Evaluation of Pathological Variability by Screening of Verticillium Fungicola Isolates with Different Mushrooms Species

Verticillium fungicola is a serious pathogen causing dry bubble disease in button mushroom (Agaricus bisporus). Present investigations were carried out on both host and pathogen by covering an aspect of variability in is...

Download PDF file
  • EP ID EP343591
  • DOI 10.24247/ijasrapr201811
  • Views 138
  • Downloads 0

How To Cite

SWAMY R, SIVALA K, SMITH D, SADASIVARAO K, LAKSHIMIPATHY R (2018). Determination of Head Load and Power Requirement for Development of BIN Type Paddy Dryer. International Journal of Agricultural Science and Research (IJASR), 8(2), 77-82. https://www.europub.co.uk/articles/-A-343591