DETERMINATION OF RAILWAY ROLLING STOCK OPTIMAL MOVEMENT MODES
Journal Title: Електротехніка і Електромеханіка - Year 2017, Vol 0, Issue 6
Abstract
Purpose. To develop a methodology for simulating of an electromotive railway rolling stock in terms of power-optimal modes on a track with a given profile and a set motion graph. Methodology. We have used combined genetic algorithm to determine optimum modes of an electromotive railway rolling stock motion: a global search is performed by a genetic algorithm with a one-point crossover and roulette selection. At the final stage of the optimization procedure we have used Nelder-Mead method for the refinement of the optimum. Results. We have obtained that traction motor on a tramcar, while driving on a fixed site, has an excessive power of the cooling system. Its using only in the considered area allows to modernize the cooling system in the way of its power reducing, which in turn provides an opportunity to increase the overall efficiency of the electromotive railway rolling stock. Originality. For the first time, we have obtained the train motion equation in the program-oriented form. This allows to use it for determination of electromotive railway rolling stock optimal control laws according to the Hamilton-Jacobi-Bellman method. Practical value. We have made the computer program to determine optimum modes of an electromotive railway rolling stock motion. The experimental studies of program results for the track section have confirmed the adequacy of the model, which allows to solve the traffic modes optimization problem for the tram track sections and increase the overall efficiency of the electromotive railway rolling stock.
Authors and Affiliations
O. Petrenko, B. Liubarskiy, V. E. Pliugin
Keywords
Related Articles
- EP ID EP293804
- DOI 10.20998/2074-272X.2017.6.04
- Views 131
- Downloads 0
ANALYSIS OF MUTUAL CAPACITANCE AND INDUCTANCE OF PRINTED CIRCUIT
The article analyzes the mutual capacitance and inductance of printed circuit and introduces an evaluation technique for conductor-to-conductor capacitance under electrical connections tracing, the technique based on a m...
CREATION OF HIGH-VOLTAGE PULSE CAPACITORS ON THE BASIS OF A COMPOSITE FILM DIELECTRIC
Research into feasibility of designing high-voltage pulse capacitors based on composite film dielectric systems is presented.
A METHOD OF DETERMINING THE ABILITY OF THE ARRESTER TO ABSORB ENERGY WITHOUT BREAKING THE HEAT BALANCE
Purpose. The aim of this study is to obtain a method for determining the capacity surge arrester nonlinear absorb energy without breaking the heat balance in modes of long-term application of operating voltage, which all...
COMPUTER SIMULATION OF INTERMITTENT CURRENT MODE OF DC ELECTRIC DRIVE WITH THREE-PHASE CONTROLLED RECTIFIER
Introduction. The mode of intermittent current for DC motor with three-phase thyristor rectifier appears in the idle intervals of some mechanisms. Active and passive filters reduce the variable component of the rectified...
FREQUENCY CONTROL IN ELECTRICAL SYSTEM MATHEMATICAL MODELING AND OPERATION CONTROL PROBLEMS
To improve the performance of primary data processing algorithms when determining frequency in problems of mathematical modeling and operation control of electrical systems, it is proposed to represent discrete instantan...