Determination of rational structural parameters of devices for polymer recycling
Journal Title: Вісник Тернопільського національного технічного університету - Year 2017, Vol 85, Issue 1
Abstract
The method of definition of rational structural parameters of gear rolls (step and angle of teeth profile, radius of curvature, the depth of the channel) was developed for such a stress-strain state of a polymeric material in which the change of orientation of conglomerates (groups) of a spheruline polymeric material occurs, causing the creation of a structure in the material. When it is exposed to tensile stresses in the direction perpendicular to the orientation, the polymer material can be destroyed.
Authors and Affiliations
Oleh Synyuk
Keywords
Related Articles
- EP ID EP252186
- DOI -
- Views 84
- Downloads 0
The method of dynamic stresses determination of media with tunnel cavities
The method of studying the dynamic stress state of elastic media with tunnel cavities under the non-stationary load as the system of concentrated forces, which are applied in the internal points of media, is developed. O...
Quality of turning using multiedge heads with elastic guiedes and elctromagnetic drives
The paper deals with experimental facilities including adaptive type multi edge head with elastic guides for fine turning. The adjustment of the head cutting edges positions in the process of machining is performed by tw...
Detection of biomedical signals disruption using a sliding window
The article proposes the method of setting the time moments of biomedical signal disruption, in particular, the electroencephalographic (for establishing the time moments of the appearance of the processes of the speech...
The flow of concentrated force through open elastic rod to the contour of the curved hole in infinite plate
The new approach to the problem of the flow to the contour of the curved hole in an infinite isotropic plate of concentrated force, applied to the end of reinforcing open elastic bar of constant rectangle cross section,...
Determination of the temperature field for the cylinder-layer system
Solution of the axes-symmetric temperature task for the body system cylinder-layer under non – ideal heat contact taking into account thin intermediate layer in the case of isotropic materials has been built. Circular cy...