Development and Application of Automated Assembly Testing Production Line for EMU Air Springs
Journal Title: Urban Mass Transit - Year 2025, Vol 28, Issue 2
Abstract
［Objective］ As the core component of EMU (electric multiple units) bogie system, the performance condition of air springs is directly linked to the operational efficiency and safety level of EMU. Therefore, it is essential to study the development and application of an automated assembly testing production line for EMU air spring maintenance. ［Method］ The development and practical application process of the automated assembly testing production line for EMU air spring maintenance is introduced. Advanced technologies, such as automated parts feeding, automated capsule pre-assembly and locking, automated pressing of capsules and auxiliary springs, automated pre-tightening and tightening of upper cover screws, automated obtaining and feeding of air springs, and a central control system for the production line, are incorporated into the assembly line. A comprehensive central control system for the production line is developed. ［Result & Conclusion］ The system successfully implemented functions such as receiving production instructions, executing production, error-proofing and mistake-proofing of production materials, and establishing and tracing electronic records of production information, thus realizing automation in the maintenance and assembly production of air springs.
Authors and Affiliations
Jintao HOU, Jiancai DI, Xiaofeng LIU, Wei YAO
Keywords
Related Articles
- EP ID EP759832
- DOI 10.16037/j.1007-869x.2025.02.035
- Views 32
- Downloads 0
Wind-Vehicle-Bridge Coupling Simulation Analysis of Flexible Hanger Arch Bridge in Suspended Monorail Transit
［Objective］ Due to the characteristics of small structural stiffness and small width-span ratio of the track beam, the flexible hanger arch bridge in suspended monorail transit is vulnerable to wind loads, thus influen...
Collaborative Control of Virtual Formation Trains Based on Event Triggering Mechanism
［Objective］ In order to improve the transportation capacity of railway lines, make the trains form a stable virtual formation within the interval, and reduce the communication pressure during the entire marshaling proc...
Monitoring and Analysis of the Adjacent Metro Shield Tunnel Deformation Caused by Simultaneous Excavation of Parallel Double Foundation Pits
[Objective] Simultaneous excavation of double foundation pits will affect the adjacent metro shield tunnel. In order to ensure the stability of the adjacent shield tunnel, it is necessary to monitor and analyze the defor...
Acoustic Characteristics Analysis of Rail Transit Vehicle Bogie Axle Box Bearing Faults
Objective To address the challenge of difficult fault identification in rail transit vehicle bogie axle box bearings under rail service conditions, it is necessary to investigate the acoustic characteristics of these fau...
TCMS-based Dual-bus Grid-connected Power Supply Control Technology Scheme for Metro Train Auxiliary Power Supply System
Objective In the current mainstream of train auxiliary power supply systems, such as cross-supply method and extended supply method, the failure of a single SIV (auxiliary inverter) can impact the normal operation of ele...