Development of a data acquisition method to train neural networks to diagnose gas turbine engines and gas pumping units
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 6, Issue 9
Abstract
<p>The application of neural networks is one of promising ways to improve efficiency when diagnosing aviation gas turbine engines and gas pumping units. In order to start functioning of such network, it should be trained first using the pre-defined training sets. These data should fully characterize work of the object in a wide range of operating modes and at various technical states of the diagnosticated assemblies. In addition, it is necessary to have a similar data set to monitor quality of the neural network learning.</p><p>To train the network to recognize faults of one type, a set of 20‒200 or more training examples is required. Obtaining such information in operation or in full-scale tests is a rather long or costly process.</p><p>A method for acquisition of training and control data sets was proposed. The sets are intended to train static neural networks recognizing single and multiple faults of the elements of air-gas channels of gas turbine engines and gas pumping units. The method enables obtaining sets of working process parameters describing operation of objects at various technical states of an air-gas channel, effect of measurement errors and object functioning in a wide range of modes and external conditions. Composition of the pumped gas is additionally taken into account for gas pumping units.</p><p>To obtain the required parameters, a mathematical model of the working process of the object of the second level of complexity was used.</p><p>The sets characterize work of operable objects and objects with significant malfunctions in spools of compressors and turbines and in a combustion chamber and for the case of a gas pumping unit, in its supercharger.</p>Two variants of formation of sets were considered: using the measured parameters of the working process; deviations of the measured parameters from their reference values and the parameters used as regime parameters in the mathematical model of the working process. For the second variant, check of expediency of including the regime parameters in the sets was made. It has been shown that regime parameters can be excluded from data sets in some cases
Authors and Affiliations
Mykola Kulyk, Parviz Abdullayev, Oleksandr Yakushenko, Azer Mirzoyev, Oleg Chumak, Valerii Okhmakevych
Keywords
Related Articles
- EP ID EP528312
- DOI 10.15587/1729-4061.2018.147720
- Views 63
- Downloads 0
Identification of energy efficiency of ore grinding and the liner wear by a threephase motion of balls in a mill
<p>We have analytically derived an equation that relates the technological parameters of a ball mill, grinding material, to the parameters of a rod primary converter of energy efficiency of ore grinding. By using a metho...
Development of a technological approach to the control of turbine casings resource for supercritical steam parameters
<p>A comprehensive model for evaluation of the resource of HPC of the turbine K-800-240-2, which includes calculation of thermal, stressed-strained state, cyclic and static damageability, is presented here. The numerical...
Modeling of the functioning of territorial systems with the purpose of identification of problem situations
<p>The purposeful territorial system (country, region), containing production, consumption, management, and environmental spheres is considered. In the process of system functioning, problem situations arise. The method...
Results of numerical modeling of the process of harvesting the seeds of flax by a harvester of the stripping type
<p>The purpose of the current theoretical study is to improve the efficiency of the technological process of harvesting flax seeds with a harvester of the stripping type by substantiating its structural-operational param...
An improvement of criteria for assessing the quality of clay raw material for architectural and construction ceramics
<p>The study analyzes the existing methods for assessing the suitability of clay raw materials for the production of architectural and construction ceramics and substantiates the need for their improvement in the directi...