Development of Metal-Porous Silicon Direct Hydrogen Fuel-Cell Production Parameters
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2018, Vol 6, Issue 3
Abstract
Effect of the electrochemical etching (anodization) that is one of the manufacturing process of porous silicon (PS) on the electrical parameters of metal-porous silicon direct hydrogen cell (Metal-PS-DHC) is considerably high. There is 4 basic anodization parameters of n-type, (111) oriented, single crystal PS fabricated in this study (time, current density, HF ratio and light). 5-100 Min. of anodization time, 5-75 mA/cm2 of current density, 1:1- 1:11 of HF:deionized H2O ratio and 1000-7000 lux light intensity is applied. The best anodization time is 40 minutes and corresponding Metal-PS-DHC electrical cell parameters are Voc= 590 mV and Isc=30 μA. The best HF: H2O ratio is 1:3 and the corresponding Metal-GS-DHP electrical cell parameters are Voc= 540 mV and Isc=18 μA. The best light intensity is 4000 lux and the corresponding Metal-GS-DHP electrical cell parameters are Voc= 540 mV and Isc=18 μA. As the experimental results show, Metal-GS-DHP electrical cell parameters are directly related to the anodization conditions.
Authors and Affiliations
Sevinç GÜLER, Çiğdem ORUÇ, Hüseyin Murat LUŞ
Keywords
Related Articles
- EP ID EP490840
- DOI 10.29109/gujsc.383081
- Views 89
- Downloads 0
Experimental and Numerical Analysis of Shear Force in AISI P20 Steel Processing
This study consists of two parts as experimental measurement and numerical analysis of shear forces in AISI P20 steel turning with cementitious carbide cutting tool. In the experimental study, cylindrical turning was per...
Real Time Measurement of Average Winding Resistances of Transformers
The monitoring of transformers that are expensive equipment of power systems is the one of important issues. Transformer monitoring systems are usually used in order to detect failures, to determine the lifetime, to meas...
Wall Solar System Working Principle and Applicability in Turkey
Solar wall is an auxiliary system for heating buildings. It is used to preheat the air passing through it so as to reduce the load of heating system of the building. It makes the heating system economically more efficien...
An Adaptive Noise Cancellation System Based on Linear and Widely Linear Complex Valued Least Mean Square Algorithms for Removing Electrooculography Artifacts from Electroencephalography Signals
In this study, an adaptive noise cancellation (ANC) system based on linear and widely linear (WL) complex valued least mean square (LMS) algorithms is designed for removing electrooculography (EOG) artifacts from electro...
Polyurethane Production from Waste Bale Fibers
Nowadays, the methods of eliminating the pollution from wastes of the materials produced as much as the production methods are important. This requires efficiently use of sources economically and ecologically. Polyester...