DEVELOPMENT OF METHODS OF CALCULATION OF TRACTION POWER SUPPLY SYSTEMS AND ENERGY SYSTEMS FEEDING THEM
Journal Title: Електротехніка і Електромеханіка - Year 2015, Vol 0, Issue 4
Abstract
Currently, the cause deterioration of quality rating of electricity on tire traction substations AC can be either how mode of operation of power systems, industrial loads so and the impact of electric traction. The experience of energy surveys show that the loss from flow potential equalization currents in each the third plot between traction substations AC is amount to not less than 250 thousand kW∙h per year. To select the optimum power and places location of the device longitudinal capacitive of compensation and decision other tasks it is necessary methodology of systems of calculation that takes into account the complex nature of the mutual influence of the quality of the electricity coming from the energy system of and the transportation process. In the paper proposed three options for calculation algorithms modes work of existing and perspective systems, traction power supply AC jointly with power supply their by energy systems, including the algorithm for calculating networks of different nominal voltages using the transformations; decomposition and synthesis of networks with different voltage levels; the iterations and probabilistic assessment of the impact of power mains. Developed the schemes formalization of graphs and the matrices of portions of the outer and traction power supply and method of selecting parameters and places location of the devices longitudinal capacitive of compensation, which are based on direct methods solving systems of linear algebraic equations with a dense banded and profile-sparse the matrix. Are generalized ways of formation and transformation of graphs of schemes traction power supply and feeding them energy systems and proposed the method of calculation the complex the moment of schemes, which increases the accuracy of calculating of flows power on traction networks to 1-2 % and allows you to select the optimal parameters and places location of the devices longitudinal capacitive of compensation. Analysis of the results of modeling and real modes of traction network shows that the efficiency of use longitudinal capacitive compensation is high on traction substations for which the resistance external electric power supply system of the is greater than 0.5 ohms, and the degree of compensation is within the allowable K = 0.7.
Authors and Affiliations
I. V. Domanskyi
CALCULATION OF OPERATING PARAMETERS OF HIGH-VOLTAGE POWER TAKE-OFF SYSTEM FOR THE PHOTOVOLTAIC FACILITY
Purpose. To ensure maximum production of electric power by photovoltaic vacilities, in addition to using highly efficient photovoltaic modules equipped with solar radiation concentrators must use a highly effective power...
DEVELOPMENT OF METHODS OF CALCULATION OF TRACTION POWER SUPPLY SYSTEMS AND ENERGY SYSTEMS FEEDING THEM
Currently, the cause deterioration of quality rating of electricity on tire traction substations AC can be either how mode of operation of power systems, industrial loads so and the impact of electric traction. The exper...
NEW APPROACHES AT CONSTRUCTION OF MAGNETIC CONDUCTORS FOR MAINS TRANSFORMERS
It is carried out exploration and the assaying of new approaches at construction of stacked laminated cores of mains transformers which consists in simultaneous application in a magnetic conductor of the anisotropic and...
MONITORING OF ELECTRICAL ENERGY QUALITY ON THE TRACTION SUBSTATION INPUT
For the implementation of measures to maintain the quality of the energy industrial enterprises have to spend a significant material and monetary assets. In this regard, significant is the feasibility study of the alloca...
HEAT TESTS OF POWER CABLES WITH XLPE INSULATION AT DIRECT VOLTAGES UP TO 110 KV
In this paper, experiment for determining the temperature difference between the elements of cable and in the open air is considered. The formation of a three cables laid in a plane with different spacing between adjacen...