ДИСПЕРСНЕ АРМУВАННЯ СІРЧАНИХ БЕТОНІВ СКЛОВОЛОКНОМ ТА ЇХНЯ ВИТРИВАЛІСТЬ
Journal Title: Вісник Національного університету "Львівська політехніка". Серія "Теорія та практика будівництва" - Year 2017, Vol 0, Issue 877
Abstract
Disperse reinforcing fibers of different materials and different lengths can significantly effect the basic characteristics of concrete, including increasing compressive strength and tensile, impact strength, wear resistance. But if the use of concrete, steel fiber reinforced was studied enough, other types of concrete reinforcement fiber, particularly glass, was not investigated enough. The same applies to special fiberglass reinforcement concretes, where is sulfur is astringent, that is sulfur concrete. The disadvantages of sulfur concrete are increased brittleness, low impact strength and crack resistance. Putting glass fiber in a concrete increases its toughness fracture, reduces the speed propagation of cracks increases endurance of sulfur concrete. The article presents the results of experimental studies of endurance sulfur concrete under multiple repeated loads. It is shown that disperse sulfur concrete reinforcing by glass fiber increases the viscosity destruction and endurance factor of concrete. The use of sulfur modifiers such is dicyclopentadiene improves the basic characteristics of sulfur glass fiber concrete, particularly endurance at multiple repeated loads.
Authors and Affiliations
S. Braychenko, I. Marhal
Keywords
Related Articles
- EP ID EP284564
- DOI -
- Views 111
- Downloads 0
INFLUENCE OF DEFECTS OF THE WORKING REBAR ON THE BEARING CAPACITY OF THE REINFORCED CONCRETE BEAMS
Every construction is influenced by different factors during operation. As a result, there are various defects and damage of these elements, which affects their operating condition. One of such defects is the corrosion o...
ANALYSIS OF THE VENTILATION AIR FLOW RATE FOR RENEWAL OF WINDOWS
Replacement of old wooden windows in a new plastic windows, in the old buildings, we achieve the massive reducing heat loss of the building. New windows are characterized by better tightness. The question is, how much mo...
ОПРАЦЮВАННЯ ДАНИХ ІНСТРУМЕНТАЛЬНОГО ОБСТЕЖЕННЯ БЕТОНУ З ОЦІНЮВАННЯМ ЙОГО ФАКТИЧНОГО СТАНУ З УРАХУВАННЯМ ФАКТОРА ЧАСУ
The problem of the concrete actual state estimation for geometric outer fence structures of localizing security system of reactor containment of Rivne NPP unit №3 is considered. The analysis of instrumental data of 2007...
INFLUENCE OF THICKNESS OF CEMENT-GROUND BASES ON BEARING-CAPACITY OF CONCRETE ROAD SURFACES
Permanent increasing of loading on road surfaces requires a permanent increase their bearing capacity. In research paper presented experimental results of test specimens of concrete road surfaces on cement-sand bases. Th...
Ventilation duct sizing tools - tradition and modernity
One of the most important problems in the hydraulic design of various building services systems is the calculation of the friction factor involved in Darcy-Weisbach equation. Ventilation duct sizing is a good case study,...